•  
    Results 1 to 10 of 119

    Thread: Engine Top End

    Hybrid View

    xintersecty Engine Top End 06-22-2015, 03:06 PM
    xintersecty I forgot to post the timing... 06-22-2015, 04:45 PM
    Daox I'd price out parts. Are you... 06-22-2015, 06:09 PM
    xintersecty have not priced anything yet.... 06-22-2015, 08:09 PM
    xintersecty So a quick questions to the... 07-03-2015, 03:41 PM
    Daox Don't break anything? :) ... 07-03-2015, 04:25 PM
    xintersecty You know both will happen! I... 07-03-2015, 05:18 PM
    xintersecty Intake. There is a lot of... 07-06-2015, 12:53 PM
    xintersecty Throttle body: 9555 Fly... 07-06-2015, 12:56 PM
    marylandaveo I will be tearing a head... 02-19-2016, 08:38 PM
    makaula hello i have to replace the... 11-06-2017, 08:49 PM
    xintersecty Ok I got started on removing... 07-06-2015, 12:45 PM
    06T200 FWIW: I pulled everything... 07-07-2015, 10:01 PM
    xintersecty Your post is gold. There is... 07-08-2015, 01:58 AM
    06T200 FWIW: the GM tis for 06... 07-08-2015, 02:43 AM
    06T200 ya THOSE bolts were buried... 07-08-2015, 02:39 AM
    Daox This is EGR piping. ... 07-08-2015, 05:08 PM
    06T200 The EGR tube can be left in... 07-08-2015, 05:37 PM
    xintersecty Guys, thank you very much... 07-08-2015, 06:25 PM
    WyrTwister I have been trying to follow... 07-14-2015, 10:35 PM
    06T200 To answer one of your... 07-17-2015, 08:36 PM
    xintersecty I have not had time to work... 07-15-2015, 01:45 PM
    arollinstone Hey guys, been doin the same... 07-15-2015, 03:01 PM
    06T200 Don't miss my post on my... 07-17-2015, 08:44 PM
    xintersecty I have a shop manual, as I... 07-15-2015, 07:00 PM
    xintersecty I wanted to post these pics... 07-17-2015, 12:39 PM
    06T200 Looks like you are close to... 07-17-2015, 08:49 PM
    06T200 FYI, the comment in my... 07-17-2015, 09:23 PM
    06T200 xinter, when you get the... 07-17-2015, 09:56 PM
    xintersecty Now the valves 9599 All... 07-20-2015, 12:15 PM
    WyrTwister I would probably send the... 07-20-2015, 02:51 PM
    xintersecty Head is off! Pictures: ... 07-20-2015, 12:10 PM
    06T200 Next step is up to you and... 07-20-2015, 09:27 PM
    xintersecty I have a 2006 engine. Maybe... 07-21-2015, 02:00 AM
    06T200 Check out rockauto, they had... 07-21-2015, 03:14 PM
    xintersecty So here is the latest update.... 08-14-2015, 08:34 PM
    xintersecty OK, Here is the engine block... 08-17-2015, 10:06 PM
    WyrTwister The intake and exhaust look... 08-18-2015, 02:23 AM
    xintersecty Keepers cost like nothing. I... 09-28-2015, 02:48 PM
    WyrTwister Best of luck , :-) God... 09-28-2015, 02:56 PM
    06T200 Lookin good X. I think I... 09-28-2015, 03:11 PM
    xintersecty Thanks! I bought all new... 09-28-2015, 03:26 PM
    WyrTwister I am asking myself that... 09-28-2015, 05:52 PM
    06T200 LOL Easy as cake! Hell if I... 09-28-2015, 05:46 PM
    06T200 Wry, you would be correct, ... 09-28-2015, 05:58 PM
    WyrTwister Thank you for the info . ... 09-28-2015, 06:32 PM
    xintersecty The timing belt and timing... 09-28-2015, 08:16 PM
    WyrTwister Now I am confused . How... 01-12-2016, 12:05 AM
    xintersecty The crankshaft pulley came... 01-25-2016, 08:13 PM
    WyrTwister Oh , that is not good ! :-(... 01-25-2016, 11:28 PM
    xintersecty OK, guys! Been super busy at... 01-25-2016, 08:17 PM
    Daox Purdy pics. :) Thats a... 01-25-2016, 08:40 PM
    xintersecty If you go to beginning of the... 01-26-2016, 12:06 AM
    WyrTwister Sorry . Been a while since I... 01-26-2016, 03:16 AM
    xintersecty Update, since I got all the... 01-28-2016, 02:19 PM
    06T200 If it's any help, much of the... 01-28-2016, 03:15 PM
    xintersecty I am going to wait until... 01-28-2016, 03:27 PM
    xintersecty ok, I ran into a problem the... 02-16-2016, 02:17 PM
    slayerized6 At this point, just get a... 02-16-2016, 02:39 PM
    xintersecty I got way too many parts and... 02-16-2016, 02:57 PM
    xintersecty So I did some more reading... 02-16-2016, 02:55 PM
    xintersecty I also found this tool, would... 02-16-2016, 05:06 PM
    WyrTwister Find another machine shop . ... 02-16-2016, 10:12 PM
    xintersecty Well after talking to an... 02-22-2016, 01:25 PM
    Daox Doh, the pics aren't working.... 02-24-2016, 02:06 PM
    xintersecty Pictures are fixed. Sorry... 02-24-2016, 03:27 PM
    06T200 Sucks about the keepers, ... 02-24-2016, 03:39 PM
    xintersecty I end up doing nothing. I... 02-24-2016, 03:56 PM
    06T200 Ahhh, the old revered 'slap,... 02-24-2016, 04:09 PM
    xintersecty I was thinking about this. I... 02-25-2016, 07:34 PM
    xintersecty no exhaust guides where... 02-24-2016, 06:28 PM
    06T200 X, I have seen... 02-25-2016, 08:11 PM
    xintersecty Your advice is well heeded. ... 02-25-2016, 08:41 PM
    xintersecty k, got a picture of the valve... 02-26-2016, 05:44 PM
    06T200 X, if that is the only... 02-26-2016, 06:06 PM
    xintersecty OK, Will be ordering tools... 02-26-2016, 07:17 PM
    06T200 Yes, 6mm (.236) is the... 02-26-2016, 06:01 PM
    TurboElk If you replace any make sure... 02-27-2016, 08:43 PM
    TurboElk Replace any guides that is. 02-27-2016, 08:44 PM
    xintersecty BTW, Johnny Durham Machine... 05-17-2016, 01:41 PM
    WyrTwister I read on the internet of 3... 05-17-2016, 02:00 PM
    xintersecty OK guys, I got my head back... 05-17-2016, 01:38 PM
    xintersecty Std. operating procedure for... 05-17-2016, 02:49 PM
    06T200 Nice!!! Looking good B. ... 05-17-2016, 03:03 PM
    xintersecty Well it's done. There are... 05-19-2016, 12:10 PM
    WyrTwister Congrats ! And good luck on... 05-19-2016, 12:42 PM
    xintersecty I want to thank all the... 05-19-2016, 01:59 PM
    xintersecty Lessons learned 1) Torque... 05-20-2016, 02:17 PM
    WyrTwister All experience costs time or... 05-20-2016, 02:33 PM
    xintersecty Latest news. I had to drive... 05-23-2016, 12:47 PM
    WyrTwister Make sure the suction... 05-23-2016, 01:25 PM
    06T200 If you are sure the tstat is... 05-23-2016, 03:14 PM
    xintersecty Do you pull off both hoses... 05-23-2016, 06:39 PM
    WyrTwister Does your tstat look like... 05-23-2016, 05:21 PM
    WyrTwister I used to use a garden hose... 05-23-2016, 11:16 PM
    petrified.rabbit Possibility of a bad... 05-24-2016, 12:18 AM
    xintersecty All, I appreciate the... 05-24-2016, 01:19 PM
    WyrTwister Exhaust leak around the... 05-24-2016, 01:34 PM
    WyrTwister You can test the tstat ,... 05-24-2016, 06:23 PM
    xintersecty The latest updates. I... 06-08-2016, 11:16 PM
    06T200 Maybe you forget one of the... 06-08-2016, 11:26 PM
    xintersecty Can't forget an O2 sensor.... 06-09-2016, 01:25 PM
    xintersecty While the plugs for the O2... 06-10-2016, 02:26 PM
    06T200 Here is the scoop from TIS on... 06-09-2016, 03:10 PM
    06T200 GM part number for the... 06-09-2016, 03:36 PM
    xintersecty Got a new O2 sensor to work... 06-14-2016, 07:49 PM
    xintersecty Been running the car awhile. ... 06-15-2016, 08:03 PM
    WyrTwister Congrats ! :-) God... 06-15-2016, 08:40 PM
    06T200 If its the one that goes into... 11-06-2017, 09:15 PM
    makaula looks like the starter needs... 11-06-2017, 09:25 PM
    06T200 What year model is it? 11-06-2017, 09:34 PM
    makaula 2006 chevy aveo lt 11-07-2017, 12:18 AM
    06T200 No need to drop the starter... 11-07-2017, 01:10 AM
    xintersecty It's a pain but pretty much... 11-09-2017, 02:56 PM
    Previous Post Previous Post   Next Post Next Post
    1. 02-16-2016, 02:39 PM #1
      slayerized6 is offline
      What do you mean there's no turbo?
      Join Date
      Jun 2014
      Location
      Long Island, NY
      Posts
      308
      Thanks
      0
      Thanked 50 Times in 48 Posts
      At this point, just get a rebuilt head

      Chevrolet Aveo 1 6 Dual Cam Rebuilt Cylinder Head | eBay
      2004 Aveo beater car
      2005 Aveo LT. 5-speed beater car (DOA)
      Reply With Quote Reply With Quote
    2. 02-16-2016, 02:57 PM #2
      xintersecty is offline
      Almost time to do my timing belt xintersecty's Avatar
      Join Date
      Sep 2010
      Location
      West Union, SC
      Posts
      1,687
      Thanks
      86
      Thanked 181 Times in 156 Posts
      Quote Originally Posted by slayerized6 View Post
      At this point, just get a rebuilt head

      Chevrolet Aveo 1 6 Dual Cam Rebuilt Cylinder Head | eBay
      I got way too many parts and I am now almost the same cost as that. Thanks for the suggestion.
      Please do not power off, firmware update pending.....
      Reply With Quote Reply With Quote
    « upper engine cooling hose | Water pump removal »

    Similar Threads

    1. P0300 Code along with a check engine light and misfiring after washing engine today..
      By 69mock1 in forum Engine & Drivetrain
      Replies: 9
      Last Post: 02-22-2015, 11:32 PM
    2. 04-09 engine interchange (thermostat housing cracked - engine overheated)
      By roughneck427 in forum Engine & Drivetrain
      Replies: 58
      Last Post: 02-03-2014, 03:41 PM
    3. Engine running rough and engine and hold light flashing
      By mpk4463 in forum Troubleshooting and Maintenance
      Replies: 10
      Last Post: 10-10-2013, 10:50 PM
    4. turbo charging, engine swap or engine build up
      By BS1313 in forum Engine & Drivetrain
      Replies: 8
      Last Post: 12-10-2011, 04:24 PM
    5. How to protect your engine (engine compartment guard / plate)
      By RMS99 in forum How-To
      Replies: 14
      Last Post: 10-08-2010, 02:50 PM

    Tags for this Thread

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •  

    Forum Rules


    Garage Plus vBulletin Plugins by Drive Thru Online, Inc.