Topic: Forged JE Pistons and Rods **UPDATED** (Read 362 times)
Brian5475E
Administrator
member is offline
Littleblueaveo
Joined: May 2004
Gender: Male
Posts: 1,316
Location: Cincinnati, Ohio
Forged JE Pistons and Rods **UPDATED**
« Thread Started on Apr 28, 2005, 3:17pm »
--------------------------------------------------------------------------------
We can make these for you with no problem but we require a sample piston in order to make the blueprints. Once we receive your sample we can make the pistons however you want them. JE has no record of the specifications for this engine to make the pistons without a sample. We have the basic info for this engine ( 1,598 cc 1.6 liters in-line 4 front engine with 79 mm bore, 81.5 mm stroke, 9.5 compression ratio, double overhead cam and four valves per cylinder L91.) But we need the sample for Valve pocket locations, angles, depths, pin heights, etc.
A set of 4 custom JE 2618 Alloy forged pistons with wrist pins and JE Rings is $625 per set and takes approx 4 weeks to build once we receive your sample piston. Any bore size or compression ratio you want...
Add $80 for Total-Seal Gapless rings
A set of 4 Custom Forged 4340 Con Rods is $825 and takes 4-5 weeks
We also need a sample Rod and Rod Bearing to make these for you....
Ship Samples to:
Top-End Performance
JE Pistons
7452 Varna Ave North Hollywood CA 91605 USA
Joined: Feb 2005
Gender: Male
Posts: 948
Location: Ontario, Canada
Re: JE Pistons
« Reply #1 on Apr 29, 2005, 12:56am »
--------------------------------------------------------------------------------
OMFG!!!! Time to bore that little crap engine like mad!!!!
Link to Post - Back to Top 64.230.103.59
--------------------------------------------------------------------------------
Check out my ride at Cardomain! http://www.cardomain.com/ride/2359460
Brian5475E
Administrator
member is offline
Littleblueaveo
Joined: May 2004
Gender: Male
Posts: 1,316
Location: Cincinnati, Ohio
Re: Forged JE Pistons and Rods **UPDATED**
« Reply #2 on Dec 23, 2005, 5:36pm »
--------------------------------------------------------------------------------
bump for update
Link to Post - Back to Top 64.158.141.216
Joined: Aug 2005
Gender: Male
Posts: 3,276
Location: NJ (You got a problem w/ that)
Re: Forged JE Pistons and Rods **UPDATED**
« Reply #3 on Dec 23, 2005, 5:53pm »
--------------------------------------------------------------------------------
sweet deal. they could most likely do the same for the 2.0L from the forenza right?
Link to Post - Back to Top 205.188.116.7
Joined: Sept 2004
Gender: Male
Posts: 459
Re: Forged JE Pistons and Rods **UPDATED**
« Reply #4 on Dec 28, 2005, 8:54pm »
--------------------------------------------------------------------------------
not bad Brian.
Link to Post - Back to Top 71.13.218.47
aveosummit
Premium Unleaded User
member is offline
I am looking for a lot of men who have an infinite capacity to not know what can't be done.-H.FORD
Joined: Jan 2006
Gender: Male
Posts: 721
Location: Houston/Baytown, TX
Re: Forged JE Pistons and Rods **UPDATED**
« Reply #5 on Mar 26, 2006, 8:10pm »
--------------------------------------------------------------------------------
Has anyone sent them a sample?
Link to Post - Back to Top 24.160.92.68
C3 CUSTOMS- The Integrated Approach to Car Stereo System Design
JOIN AVEOTUNING
Brian5475E
Administrator
member is offline
Littleblueaveo
Joined: May 2004
Gender: Male
Posts: 1,316
Location: Cincinnati, Ohio
Re: Forged JE Pistons and Rods **UPDATED**
« Reply #6 on Mar 26, 2006, 9:07pm »
--------------------------------------------------------------------------------
you only send a sample when you order a set
Link to Post - Back to Top 72.49.231.138
Joined: Feb 2006
Gender: Male
Posts: 166
Location: Edmonton, Alberta, Canada
Re: Forged JE Pistons and Rods **UPDATED**
« Reply #7 on Apr 26, 2006, 8:02pm »
--------------------------------------------------------------------------------
I have a set of JE pistons for my 2.0L and so do a few others from Daewootech.
I don't think anybody has ordered the 1.6L pistons before.
The price on the pistons is fairly normal.... I was quoted very similar prices but I managed to get my set from someone else for significantly less money ( pistons were never used )
The rods are a little on the expensive side...... I had quotes closer to $650 ..... one company I was thinking about getting rods from was Pauter Rods..... they make decent reliable stuff.
Link to Post - Back to Top 68.150.219.124
Joined: Feb 2006
Gender: Male
Posts: 166
Location: Edmonton, Alberta, Canada
Re: Forged JE Pistons and Rods **UPDATED**
« Reply #8 on Apr 26, 2006, 8:03pm »
--------------------------------------------------------------------------------
Personally.... if you want higher compression..... get some European X16 pistons.... I think they are 10.5:1
Link to Post - Back to Top 68.150.219.124