Help with 2010 Aveo engine swap

[pellucid]

(edit) You can basically skip this first post, thanks for looking. The problem now is that it runs at high RPM, over 3,000, but won't idle and doesn't respond to the throttle normally below 2,500-3,000rpm. (edit)


Hi all, I signed up here hoping to find technical info during my engine swap.

This car isn't mine but I've been doing work on it for a few years for a friend. Two weeks ago the dealer helpfully replaced her water pump for $800 while failing to notice the shot head gasket, now it's in my garage with a 60,000mi engine waiting to be swapped in.

I'm a fairly capable amateur mechanic and this isn't my first time pulling an engine but if anyone has tech specs or gottchas or tips they would be much appreciated.

Off the top of my head right now: Are the flywheel bolts, engine mount bolts and axle flange bolts reusable or torque to yield? Donor engine is an auto, car its going into is a 5spd so I have to transfer the flywheel and clutch over.

Thanks in advance for any help!
-Pellucid