HO2S Bank 1 Sensor2

[drmagieed]

Dear forum members"
As most of you know that I am swapped ecotec 1.6 L LXV engine of aveo 2009 in my aveo 2007. I replaced my exhaust front pipe which has no o2 sensor with the pipe # 1 in the attached photo. The scan tool read the sensor 1.275 and the sensor read is stable on this value. I ask about the plug which I should plugged the sensor in where I doubt that the mechanic plugged the sensor in the right plug. If anyone has a photo or something else regarding this plug I will be great full.
Thanks.

[drmagieed]

[Daox]

I'm not really sure what the question is.

[drmagieed]

I'm not really sure what the question is.

thank you first
the question is I need the to which plug I should plugged in the o2 sensor 2 (after catalytic converter). If there is a distinguish color for it or a photo?
I mean that the sensor wire in the red arrow direction goes to which plug??? to be connected to the engine and ecm?
thanks again
Attachment 9994

[drmagieed]

That's the photo and the red arrow goes to which plug?

[drmagieed]

at least I need the four colors of o2 sensor 2?

[Daox]

The O2 sensor will only plug into the correctly shaped connector. Find one around that area and you're set.

[drmagieed]

The O2 sensor will only plug into the correctly shaped connector. Find one around that area and you're set.

thanks, if you have a photo for that connector, please attach it.

[drmagieed]

anyone can help me with 4 wires colors of HO2S Bank 1 Sensor 2?

[Daox]

Sorry, I don't have any pics of the O2 sensor plug.