Recently broke a nipple off of back water pipe crossover tube. 2 day amazon prime cause no one had it local. Here is a write up cause apparently no one ever replaces them or atleast no one has explained how to do it. Feel free to message me with questions
disconnect the battery
remove the battery tray (4 - 12mm bolts)
unbolt the fuse block and fold towards front of vehicle (2 â– 10mm bolts)
loosen/remove hose clamp to lower radiator hose from the top
loosen/remove the 2 hoses and clamps from heater hose from the top
raise and support front of car with jack stands
disconnect everything on the intake support bracket and remove on backside of the car (2 12mm
bolts and 2 14mm bolts)
remove starter assembly (13mm nut for grounds on lower bolt, 13mm and 10mm for starter
leads, 2 deep 13mm with 6 inch/(2)3 inch extensions to remove starter assembly from
bellhousing
remove hose clamp from hose that goes to water pump
remove 2 12mm bolts from retaining bolts from water pipe
remove pipe from top of vehicle.
Installation is oppisite of removal
*for easy install start bolts on water pipe first before trying to connect hoses.