•  
    Page 1 of 2 12 LastLast
    Results 1 to 10 of 31

    Thread: xiaogary header

    Hybrid View

    EvySpeedy254 xiaogary header 07-05-2010, 05:42 PM
    timmytaxi Are there any torque specs... 03-17-2011, 10:23 PM
    snowmobilejon5000 Tight, I used just a standard... 03-30-2011, 10:02 PM
    timmytaxi Installed the header with... 03-18-2011, 08:01 PM
    serega12 I like the silver!. Looks... 03-25-2011, 09:09 PM
    timmytaxi Thanks its silicone coating... 03-31-2011, 12:30 AM
    snowmobilejon5000 The silver on mine from... 03-31-2011, 06:43 AM
    Nemasys Well thats a good thing then,... 03-18-2011, 10:16 PM
    snowmobilejon5000 I went from 104 to 117 bhp... 03-30-2011, 09:59 PM
    timmytaxi I just smoked a cavalier that... 03-31-2011, 12:27 AM
    petrified.rabbit working on your post count? ... 03-31-2011, 02:01 AM
    snowmobilejon5000 I have my posts routed to an... 03-31-2011, 06:45 AM
    snowmobilejon5000 est from gtech I know it... 03-31-2011, 06:40 AM
    petrified.rabbit you put the link between the... 03-31-2011, 12:31 PM
    snowmobilejon5000 Pictures by snowmobilejon5000... 03-31-2011, 10:36 PM
    petrified.rabbit http://mob1212.photobucket.com... 03-31-2011, 11:43 PM
    snowmobilejon5000 http://i1212.photobucket.com/a... 04-01-2011, 06:40 PM
    McGrinnan Wait who is selling these... 04-07-2011, 07:50 PM
    timmytaxi Xiaogary 04-07-2011, 07:55 PM
    snowmobilejon5000 You get them fast also. Just... 04-07-2011, 09:24 PM
    serega12 Re: xiaogary 07-05-2010, 09:59 PM
    thehunterooo Re: xiaogary 07-07-2010, 01:25 AM
    AveoGirl Re: xiaogary header 07-08-2010, 07:49 AM
    serega12 Re: xiaogary header 07-08-2010, 08:44 AM
    thehunterooo Re: xiaogary header 07-08-2010, 03:20 PM
    serega12 Re: xiaogary header 07-09-2010, 07:46 AM
    petrified.rabbit Re: xiaogary header 07-09-2010, 09:45 PM
    thehunterooo Re: xiaogary header 07-09-2010, 10:05 PM
    serega12 Re: xiaogary header 07-09-2010, 11:02 PM
    thehunterooo Re: xiaogary header 07-09-2010, 11:03 PM
    serega12 Re: xiaogary header 07-09-2010, 11:06 PM
    Previous Post Previous Post   Next Post Next Post
    1. #1
      EvySpeedy EvySpeedy254's Avatar
      Join Date
      May 2010
      Location
      Killeen, TX
      Posts
      226
      Thanks
      0
      Thanked 0 Times in 0 Posts

      xiaogary header

      how much did your guys headers cost? but yea i kno this need sto be ina different thread

      i had contacted this buyer about headers and he replied right away and put them up for sale on his ebay as soonas i asked for them. although i ran out of money i will definitly buy from him. great communicator?

    2. #2
      Should I keep it? timmytaxi's Avatar
      Join Date
      May 2010
      Location
      US: SC
      Posts
      54
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts
      Are there any torque specs for the header bolts?

    3. #3
      Should I keep it?
      Join Date
      Nov 2010
      Location
      Hancock, MI
      Posts
      60
      Thanks
      0
      Thanked 0 Times in 0 Posts
      Quote Originally Posted by timmytaxi View Post
      Are there any torque specs for the header bolts?
      Tight, I used just a standard wrench with an extension, mother nature will help in keeping it all together. Mine after one solid winter, I checked the bolts and I cannot move them, either way.
      2008 aveo5 SV
      custom 4-1 headers, Xaio's Headers
      CEL prevention software
      265 cams from Europe
      short throw shifter
      billet shift knob
      Unbreakable

    4. #4
      Should I keep it? timmytaxi's Avatar
      Join Date
      May 2010
      Location
      US: SC
      Posts
      54
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts
      Installed the header with some minor difficulties. You will need bots for the collector pipe that was connected to the cat and you will also need some nuts to use as a spacer in-between the header and the original nut on the head stud.

      header.jpg picture by timmytaxi1 - Photobucket

    5. #5
      Timing belt broke, do I keep it? serega12's Avatar
      Join Date
      Mar 2010
      Posts
      2,330
      Garage empty: add car
      Thanks
      0
      Thanked 6 Times in 6 Posts
      I like the silver!. Looks pretty good.

      Quote Originally Posted by timmytaxi View Post
      Installed the header with some minor difficulties. You will need bots for the collector pipe that was connected to the cat and you will also need some nuts to use as a spacer in-between the header and the original nut on the head stud.

      header.jpg picture by timmytaxi1 - Photobucket
      2006 Chevrolet Aveo a.k.a. Holden Barina – SOLD
      ​2008 Chevrolet Cobalt SS/TC - SOLD

    6. #6
      Should I keep it? timmytaxi's Avatar
      Join Date
      May 2010
      Location
      US: SC
      Posts
      54
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts
      Quote Originally Posted by serega12 View Post
      I like the silver!. Looks pretty good.
      Thanks its silicone coating to keep my engine cool.

    7. #7
      Should I keep it?
      Join Date
      Nov 2010
      Location
      Hancock, MI
      Posts
      60
      Thanks
      0
      Thanked 0 Times in 0 Posts
      Quote Originally Posted by timmytaxi View Post
      Thanks its silicone coating to keep my engine cool.
      The silver on mine from xiaogary is gone due to michigan winter, but they still perform and sound well.
      2008 aveo5 SV
      custom 4-1 headers, Xaio's Headers
      CEL prevention software
      265 cams from Europe
      short throw shifter
      billet shift knob
      Unbreakable

    8. #8
      Still love my daily driver Nemasys's Avatar
      Join Date
      Dec 2006
      Location
      Hawkesbury, Canada
      Posts
      862
      Thanks
      0
      Thanked 1 Time in 1 Post
      Well thats a good thing then, its a good idea to change any nuts and bolts when your put in a new part, that way its makes the install way easier and if you need to take it appart you dont have to play with rusted and used bolts
      > 2010 Mazdaspeed 3
      - Fully built, GT35R, 500+ whp

      > 2004 Hatchback 2.0L Turbocharged [RETIRED]
      - T3/T4 T04E .60 A/R Compressor
      - HKS SSQV, OBX Wastegate
      - FMIC with 2.5" piping
      - Tuned with Megasquirt II v3.57

    9. #9
      Should I keep it?
      Join Date
      Nov 2010
      Location
      Hancock, MI
      Posts
      60
      Thanks
      0
      Thanked 0 Times in 0 Posts
      I went from 104 to 117 bhp with his 4-1 headers, intake and a straight 2 inch pipe. The only stock section of pipe is the mid resonator because I like not being def in the car. I want to post picture but how do you do it on here. I know I need to upload to photobucket but what do I do after that?
      2008 aveo5 SV
      custom 4-1 headers, Xaio's Headers
      CEL prevention software
      265 cams from Europe
      short throw shifter
      billet shift knob
      Unbreakable

    10. #10
      Should I keep it? timmytaxi's Avatar
      Join Date
      May 2010
      Location
      US: SC
      Posts
      54
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts
      I just smoked a cavalier that had a CAI and exhaust not sure what else he had. Thanks to this header I can beat them with a car length!

    Page 1 of 2 12 LastLast

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •