Disabling the daytime running lights.......

Hey. I asked this question in Sept. and someone posted the picture of where the module is that you pull out and it disables the damn daytime running lights. I did a search here, and all i can find is my original question and a few replies. I want to take it to my mechanic and let them crawl under the dash and pull that module out. Can someone post that picture again please? And describe where it is located? I want to go this morning to them, and have them do it. I have the time, no freaking work, and I have saved up some money, incase they even charge me anything for a 5 min procedure. I cant find this module, the label came off, and being upside down, under the dash, searching for that module makes me sick to my stomach! can someone post that picture please? Thank you, Stan

picture here:

AVEONetwork.com • View topic - FAQ

Thanks for the route to the picture. It was a great help to my brother in law, when he disabeled the DRLs last night. He knew where it might be,...but the picture helped him find it in a flash! Thanks again.

Yep, luckily for the 2008 and up versions, its just a matter of pulling the "NA DRL" fuse from the cabin fuse box. No more DRLs!

i click on the link and it wont open up. i took want to disable the daytime running lights. any help?

aveonetwork is offline. i know the picture is posted here too though.

I like, i was wondering the same thing

and sweet it worked, thanks for making this post and for people answering it

i did this yesterday, when i disconnected them my check engine light came on. i turned my car on and off 3 times and the check engine light went back off. all set

the link wont work and i have hids connected to my highbeam wires due to this drl issue it sucks

Quote:

---

Originally Posted by ajk148700

the link wont work and i have hids connected to my highbeam wires due to this drl issue it sucks

---

Are you 07 and below or 08+? 07 and below you disconnect a black mode under kick panel below the steering wheel. If you're 08+, pull the NA DRL fuse in the driver door jam panel.

This thread (click here) may help, even though I initially made a fool of myself in not noticing what DRL on the fuse panel meant...DUH! 8-[

Quote:

---

Originally Posted by Thymeclock

This thread (click here) may help, even though I initially made a fool of myself in not noticing what DRL on the fuse panel meant...DUH! 8-[

---

DRL=Drag Racing List! :lol:

I gave to unplug it the last month the drl light strobes while going down the road it's annoying

I tried disabling my DRL's by unplugging that module but i seem to be having a hard time getting undr there with both hands to push in that lock tab keeping it secured in there. I have tried using a flat head to push in the tab but even with that it still seems to be either stuck or still locked in there. Any suggestions on how to get it out? Thanks!

Maybe get help from someone with smaller hands? :cool:

haha thanks for the input :) finally i got in there and took off the plastic piece right under the steering wheel by pulling/popping the piece loose all the way around, then i took out all of the bolts that were holding a metal plate on right behind the plastic piece i took off. Then i was able to get to it much easier. I had to use a Philips screwdriver to unscrew the module from the metal piece it was attached to. Then i had to use a flat head to pry, and pry, and pry the plug-in from the module. I really don't know how it was so hard to get out. I was just ridiculous and seemed a lot harder than what it seemed it should be lol I might have broke the plug in but i doubt ill be enabling my DRL's again after that fiasco haha Thanks again and hopefully someone else can benefit from this post lol

to give you an idea, i cut the wire on the plug, (left the module) i cut the wire that had 12v when the key was turned on, because one only has 9 V that goes to the lights, make sure its the 12v and i, drilled out the little empty lens in the headlight from the back and put a h3 led bulb in each side, so when i turned the cars key on they came on, looks pretty sweet. but during the past year i bought the projector halos and the corner light i wired up the same way, and it looks pretty sweet, ive never seen another running around like that in the fort worth area, just might be an idea, i took the drl's out cuz it burns out the bulbs faster. 9V is harder on a bulb then the full 12V.

So you did a "city lights" mod...