•  
    Results 1 to 5 of 5

    Thread: Joey mod ideas

    1. #1
      Almost time to do my timing belt daug1502's Avatar
      Join Date
      Jul 2010
      Location
      Iowa, USA
      Posts
      1,050
      Thanks
      0
      Thanked 2 Times in 2 Posts

      Joey mod ideas

      Has anyone tried or considered doing the joey mod to match the color of their car?

      Also has anyone considered the same for a set of altezza tail lights, Or LED taillights?

      I want a unique look for my car, and I believe this would be something worth looking into. I Decided to ask in hopes of seeing pictures of this that someone had already done, or even find out if it's a good or bad idea.


      http://www.aveoforum.com/phpBB3/view...p?f=41&t=28184
      2008 Aveo5 SV

      I will think of a better signature later.

    2. #2
      Lifetime owner
      Join Date
      Sep 2008
      Location
      Pittsburgh
      Posts
      8,013
      Garage empty: add car
      Thanks
      2
      Thanked 171 Times in 142 Posts
      i believe one man jam did his to match.. the taillights would be harder, they are melt bonded sine they are the same type of plastic, you cant just take the lights apart as easily.. could do it with two sets easily enough.


    3. #3
      Still love my daily driver
      Join Date
      Mar 2010
      Location
      TEXAS
      Posts
      699
      Thanks
      0
      Thanked 1 Time in 1 Post
      ^good 2 kno. i was gonna attempt it...
      Silver Bullet~
      http://www.cardomain.com/ride/3360111/1

      Silverado Ext cab 02
      Accord Ex 94
      Aveo Ls 06

    4. #4
      Lifetime owner
      Join Date
      Sep 2008
      Location
      Pittsburgh
      Posts
      8,013
      Garage empty: add car
      Thanks
      2
      Thanked 171 Times in 142 Posts
      that is why the diy for making your own altezza includes him drilling out the old lens, it can't just be separated as easily...

      if you have a real steady hand and a fine cut tool on dremel or something you could cut the seam, and then use a plastic bond to reassemble, but that stuff "etches" clear plastic, so to get enough on there to make them water tight would also leave you "frosted" around the edges..

      i'm not sure how the diy guy did it, that is sort of possible but i think since he made a new lense, he had a bonding surface left from the edge of the old lens.


    5. #5
      Almost time to do my timing belt daug1502's Avatar
      Join Date
      Jul 2010
      Location
      Iowa, USA
      Posts
      1,050
      Thanks
      0
      Thanked 2 Times in 2 Posts
      I forgot to look up painting tail lights, and never though about DIY Altezza's. I will have to look up one man jam to see how his turned out. Good to know about the plastic matching on the Tails, that will make things more difficult, and frosted look is a no thanks. I will have to get my hands on a lens and look it over. First I need enough income to get out of the dreaming stage. . .

      Thanks for the input.




      http://www.aveoforum.com/phpBB3/view...p?f=41&t=28184
      2008 Aveo5 SV

      I will think of a better signature later.

    Similar Threads

    1. Headlight "Joey Mod" FINALLY ON THIS SITE!
      By tidus10 in forum How-To
      Replies: 35
      Last Post: 05-16-2015, 03:42 AM
    2. New to the Forum... Looking for Ideas
      By Skandris in forum Photographs and Videos
      Replies: 8
      Last Post: 04-21-2010, 01:50 AM
    3. Replies: 3
      Last Post: 12-21-2008, 08:58 PM

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •