License Plate LEDs

[jnhalstead]

So I have had my LEDS in for a while but what annoyed me was how cheap all car companies are! If you noticed both lights point the same way, which is fine for the dim factory bulb but when you put LEDs in it shines way off on the edge of the hatch. Well with a exacto knife I fixed that. I cut off the inside of the drivers mount and it allowed me to reverse the light so it criss crosses and shines only on the plate.

This is how they normally shine, both pointing towards the driver



I also did the other side to shine them both away from each other to check the light output



but I like it better like this



what I had to modify to get it to flip



these are the LEDS I currently have in

http://www.ebay.com/itm/High-Power-C...81081763638%26

[MikeC06]

It loons really nice how both are on the plate now! I might get some of them for my plate =D

[2010AveoLT]

well, Looks Like I'm a Hipster, I've Been Installing License Plate LEDs even before I got Scoots (Did it in my Plymouth Breeze), and it makes a WORLD of Difference!

[jnhalstead]

well, Looks Like I'm a Hipster, I've Been Installing License Plate LEDs even before I got Scoots (Did it in my Plymouth Breeze), and it makes a WORLD of Difference!

See that's what I don't like about them, your drivers side doesn't even shine on the plate, it shines onto the trunk. almost every car I have ever owned has had this issue.

[MikeC06]

Well I will getting this now, I was pulled over today and he didn't give me a warning or anything, but he did inform me that my license plate bulbs were out, thank god for nice cops.