Taking off the front bumper

[mikedudley17]

those lights actually look pretty cool. nice work!

i like the fact that they will fill up the stock hole perfect and not look redneck ghetto or ricey

[mikedudley17]

i think he should find a place that wholesales these lights and start producing and sellin them. id buy them but i would have to reroute my ram air. son of a gun, they would look awesome on my car too. make them like bluish in color, yeh that would be great.

[mystere485]

in the 07 sedan you have to remove the lower airbox in the pass. front lower bumper corner in order to access the screws holding the center of the bumper to the sub-frame. The easiest way to remove the airbox is to take the plastic wheel liner out cause there is a bolt arms length high from the bottom of the bumper you have to manuever a socket to. took me 35min w/o taking the wheel skirt off. then there are 3 screws holding the fog light in place and 4 screws holding the trim in place. the two inboard screws are not accessible with a long handled screw driver from the side of the bumper.

i bet everyone from other countries would tear that **** UP. i gotta give you props for makin the retrofit look so good man.

[mikedudley17]

especially in south america where the aveo seems to be like the honda civic is here. at least thats where i see lots of the heavily modded aveos at.

[xstevex]

Thanks for all the great comments guys!
The work took me about 8 hours to do.

The first foglight got a tiny scratch from the dremel due to being the first one, but it isnt really noticable. I found a better way to cut it the second foglight that leaves everything perfect.

I just got done sealing the back up, and I'll put the lens on tonight after work. Ill take some pictures tonight and tomorrow to show you the finished work.

I hope to have my HID retro fitted headlights on this week as well.

If you have any questions just ask!

[whiteraven]

Pics man!!..Where's the Damn Pics!!