WiDe BoDy

[mikedudley17]

http://aveoclub.net/phpBB2/garage.php?mode=view_gallery_item&type=garage_mod& image_id=72

problem solved

exactly what u need to do.

[Aveo_Tuner]

well if you just put a mesh screen across all the gaps on it except for where your exhaust would be, that should take care of most of the ugly.

thats what i was thinking was black mesh and i have a custom cat back already what i was gonna do was center the tip out but keep it just behind the screen so you cant easily see it then i was gonna rattle can the undercarriage parts you can see black so its not as obvious

[Aveo_Tuner]

and i was gonna go with big lip deep dish rims to fill the gap im mabye thinking a five lug conversion to handle the stress on the hubs what do you guya think???

[mikedudley17]

and i was gonna go with big lip deep dish rims to fill the gap im mabye thinking a five lug conversion to handle the stress on the hubs what do you guya think???

uh, what stress are we talkin about? if u are not puttin down at least 200 wtq then there shouldnt be too much stress on ur hubs, they are pretty solid as is, so whatever you are doin right now should be ok, even with the big rims.

[aveodude]

and i was gonna go with big lip deep dish rims to fill the gap im mabye thinking a five lug conversion to handle the stress on the hubs what do you guya think???

You do realize that the lug nuts do not support any weight of the wheel. They just secure them to the hub. And filling in the back with fiberglass would be a bad idea because of the parachute effect it will cause. I would guarantee a loss in mpg and acceleration. And I think the mesh would look ricey because it is too much of an area to fill.

[mikedudley17]

maybe another suggestion would be vents built into the rear of the bumper (only if it was fiberglassed in). that would help with the drag problem.

or maybe a redesigned rear bumper. whiteraven was/is working on one.

[aveodude]

but then the question is, why buy an aftermarket rear bumper if you are gonna change everything about it?

[mikedudley17]

hey im just tryin to throw ideas out there. thats kind of like asking why buy a car if you are going to change everything about it u know? it would just give him something to work with. and maybe because its the only wide body kit for our car (that i know of).

[whiteraven]

I say go for it...I bought a previous SEMA car...everyone thought I'd just drive it... but I used it as a base to make a car I can be really proud to own for a long time.

If you are gonna start on a widebody, I suggest you join http://www.FiberglassForums.com and read up on all the helpful information there...you can save alot of money by making your own fender flares with foam and a hot knife.

[aveosummit]

If you really want to do a special wide body kit for your aveo. You should look into getting a rear bumper piece from a lancer body kit. It will require some customizing but both sets will, just another option. Check out http://www.body-kitz.com/index1.html for body kit options, I know you can get it cheaper on other sites.