WiDe BoDy

[aveosummit]

none that I have found.....but I will keep looking and see what I can find...

[mikedudley17]

http://www.lowtuners.be/v5/modules.php? ... r=0&sid=61

^found this so far but no hard info....

[aveosummit]

http://www.fabulouscars.be/

This is the link that I found the car on initially, pointed out to me by the guys at Mobile Spec...

[Aveo_Tuner]

well if you just put a mesh screen across all the gaps on it except for where your exhaust would be, that should take care of most of the ugly.

+1, besides having a hole theres good for air flow so mesh would do it.

Also notice it fits up to 9" wide wheel in the front, and 10" in the rear...if you don't fill those gaps up with some wide wheels that cars going to look like total crap. I'd recommend 5zigen Fno1r-c, it's one of the few really lightweight, wide wheels available for less than $300 each and has a decent selection. You could probably just put 8" wide wheels on there if you get an offset that'll fill up the fenders well enough and some 235mm tires, anything bigger is a huge waste. Even if you double the hp of the car, and have an amazing suspension you won't get much use out of wider tires.

yeah i actually race the car on a regular basis so i need a skinnier tire so i acn actually get some heat into them i wouldnt go wider than a 235

[Aveo_Tuner]

and i was gonna go with big lip deep dish rims to fill the gap im mabye thinking a five lug conversion to handle the stress on the hubs what do you guya think???

You do realize that the lug nuts do not support any weight of the wheel. They just secure them to the hub. And filling in the back with fiberglass would be a bad idea because of the parachute effect it will cause. I would guarantee a loss in mpg and acceleration. And I think the mesh would look ricey because it is too much of an area to fill.

yeah im talking cornering forces in which the lugs do encounter load