Printable View
So in just about EVERY vehicle out there...a stock system comes with 2 speakers up in the front part of the car...almost ALWAYS in the doors. Im thinking about making a custom place for some hard hitting speakers. Has anyone done this? for any car? take the speakers out of the door, and install new ones else where in the front of the car. Thats what i plan to do, jes wondering if anyone had an insight on where to put them
hmmm i think it would be cool to put them somewhere under the dash on the side. and keep the ones in the door.
I think something like this would be cool
http://i10.photobucket.com/albums/a1...s/DSCN1353.jpg
http://i10.photobucket.com/albums/a1...s/DSCN1352.jpg
LOL... Guess I should start reproducing these pods for you all..Black 'Glass or Billet-Proof 'Glass ok?
Quote:
Originally Posted by megaveo610
What exactly do you mean by hard hitting speakers? What are you trying to achive by relocating the speakers(better staging(sound quality), spl(loudness))?
by pointing the drivers side to the passanger and visa versa you achieve good sq. using speaker pods you can aim the speakets properly. hope that help.
http://www.cdtaudio.com/pdf/Stereo_Imaging.pdf
for imformation on stereo imaging
http://www.cdtaudio.com/pdf/Staging_flyer.pdf
for more information on staging
Quote:
Sound quality generally is the quality of the audio output from various electronic devices.
Sound quality can be defined as the degree of accuracy with which a device records or emits the original sound waves. For digital recording/digital playback, this accuracy depends on the range of sound which is sampled, the rate at which it is sampled, and the various conversions that occur in any sound reproduction system. With lossy codecs such as MP3 and Ogg Vorbis, sound quality is a quantifiable factor that determines how much sound data the encoder is allowed to discard in order to reduce file size. MP3-encoded sound is generally CBR, so its quality is defined by its bitrate, in kilobits per second (kbit/s). Quality of Ogg Vorbis-encoded files, which are most commonly VBR, is a decimal value ranging from –1 to 10, with –1 being suitable only for low-quality voice.
The range of sound (in hertz) which the equipment detecting the sound samples affects sound quality. Humans can hear vibrations ranging from about 20 Hz to approximately 20 kHz, so sampling that doesn't extend this far will have a detrimental effect on the resultant quality.
The rate at which the sound is sampled refers to the amount of information the detection equipment records about each second of sound. More information about the shape of the sound waves results in a more accurate sample, in other words, this is due to the digital quantization of the analogue sound wave.
The conversions of sample range and sample rate between different pieces of equipment in a sound recording and reproduction system will affect the quality of the sound. More conversions usually results in a lower level of quality.
Sound quality is the physical pleasure or fatigue experienced by a listener, and is typically characterized in a live setting by the skill of the musicians, the tonal quality of their instruments, and the physical traits of the venue. In a playback setting it is characterized by the same traits as in a live setting but is also affected by the recording techniques and equipment used, from the microphones at the session to the final pressing at the record or compact disc factory, to the quality of electronics and speakers used to recreate the sound in a listener's home.-http://en.wikipedia.org/wiki/Sound_quality
The following articles talk about rear fill, which I think is something that needs to be considered. When focusing on the front speakers.
http://www.cdtaudio.com/pdf/Learn_rearfill.pdf
http://www.wickedcases.com/caraudio/rearfill.html
http://www.termpro.com/articles/rearfill.html
well since we all have the same car (+/-) than someone (Phillip?) can tune theirs and just give us the laymens for basic intsall. Like "In the front Aim Both speakers where a dome light would be in any typical car." <-- Thats not real advise guys, don't try it :-P I say that because sometimes I'll read something and it'll commit to memory, so when I go to do it I say to myself "I read somewhere that this was the best option."
Well something that you must know is that most speakers do not produce an even sound wave, which makes staging them very difficult. 8) The solution is usually to play the speakers in a variety of locations to find out what sounds go to you(since personal options differ). When you move into the higher end audio speakers ie., morel, rainbow, cdt audio, genesis, etc..... they can be placed in factory locations and still sound great because they produce an even sound wave. The previous links that were given more for your reading pleasure and general information. as kirbycope said you have to be the judge of what you read.. Also you must consider are you planning to design a soundstage for sound quality or do you just want the music to sound better then factory.Quote:
Originally Posted by kirbycope
ok those pix look cool i think the under dash is the best option though.
these speakers are hitting so hard its rattling the door apart, and sounds like crap, im done putting that stupid sound foam crap all over its not working
What size speakers are you using? And what location are you referring to when you say under the dash?Quote:
Originally Posted by megaveo610
6 1/2 i believe...im not sure yet somewhere UNDER THE DASH
...Post some pics when you finish, let us know how they turn out.....
I just fiberglassed my a-pillars.
here's what I have now....
6.5" Infinity Kappa in the rear deck
6.6" Infinity Kappa in the front doors
4" infinity Kappa in the a-pillar along with a 1" Infinity Kappa tweeter
10" Infinity Basslink (upgrading to a 10" Infinity Kappa Perfect soon)
Speakers powered by a Kicker Amp
Ive been trying to upload the pics but something is messed upwith the camera. they wont upload.
pics!
believe me, im trying!
i hope u start reproducing those, id buy them!Quote:
Originally Posted by whiteraven
Building the Molding table Right Now!!
Coming Soon....
so what happened to this?
I picked up some spare A pillars yesterday...
waht r u gonna do? mount tweeters or something? lol i meant waht happened to the door speakers thing.
Oh, we are working on both as the funds are available...materials cost money, so I can't do too much too fast cause I'm not rich. ;)