A few people have been asking me about my switch...

the switch next to the hazards. The manu had aftermarket relays in mind when they designed this pieace and i used it to my advantage as seen here:

1. take apart ur dash like u did when u replaced the stereo system (for those who havent done this,

point 1...CAREFULLY pry into with a flathead screwdriver pry this piece off on both sides

point 2...remove these bolts and remove stereo

point 3...remove these bolts

point 4...get under this panel and pry off as u work ur way up to windshield

2. On this here panel u just removed u cannot completely take it off until u remove A. wiring to the hazard switch, B. Wiring to the clock so do that

3. look behind it, notice that plastic beam going across, by now u should see how to remove it, i went custom to put in this particular switch and as a wizzard of auto interior and electronics i dont tell ALL of my little tricks but that how u get to the little holes that are removable and ready for a toggle switch so do it up, be unique be custom, and good luck



of course feel fre to ask questions

[kirbycope]

don't tell all your tricks? that's just great...
well I would find another hazard switch on ebay or ar rhe yard and paint ir black, unless Radioshack had a toggle that would work.

[AveoSSSupercharged]

YOU ROCK! haha

don't tell all your tricks? that's just great...
well I would find another hazard switch on ebay or ar rhe yard and paint ir black, unless Radioshack had a toggle that would work.

good plan ... looks like those holes would fit another hazard switch no prob...

[dmeech]

I missed this if you posted about it. But what does the switch do?

[kirbycope]

whatever you want it to, like neons or whatever you want to wire to a stock toggle sitch for a clean instal.