•  
    Page 2 of 2 FirstFirst 12
    Results 11 to 11 of 11

    Thread: Fuse replacement.

    1. #11
      What's wrong with my car?
      Join Date
      Dec 2014
      Location
      Griffin, GA
      Posts
      1
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts

      How to remove the protected fuse

      Quote Originally Posted by PittViper View Post
      Well, I figured it out!

      To get this fuse out, here is what you do:

      1. Pull the fuse holder out half way.
      2. Now you can see the back two prongs of the fuse. With a small screwdriver, gently "push" the fuse out one side at a time from the BACK.
      3. Now the fuse should be sticking out enough to grab with small pliers. Grab and pull it out.

      Mine was blown, so I replaced it.

      Viper
      Ok, that was. Confusing!
      yes pull the black or yellow in my case fuse protector out. The pop the little protector off. Mine was for some reason facing the front and I had to yank the entire thing off to see the tab. Then you can slide out the fuse to check it and replace it.







      Attached Images Attached Images     

    Page 2 of 2 FirstFirst 12

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •