•  
    Results 11 to 20 of 28

    Thread: How to fix your clock issues and warning lights

    Threaded View

    rret How to fix your clock issues... 02-02-2015, 12:04 PM
    sbelcher What kinda solder you talking... 02-03-2015, 09:33 PM
    sbelcher OH THE SPACES? solder them... 02-03-2015, 09:34 PM
    rret solder a cold solder joint 02-03-2015, 10:45 PM
    sbelcher Thanks a lot. I will give... 02-04-2015, 12:59 PM
    The Swamp Fox Any idea if those indicator... 08-16-2020, 05:00 PM
    slayerized6 I bought a used clock module... 02-05-2015, 08:30 AM
    AndrewButler05 If mine ever dies again, I... 02-05-2015, 09:03 PM
    cburns This is exactly what mine... 02-26-2015, 06:43 PM
    ChevyCC I think I could take some... 02-26-2015, 06:49 PM
    cburns That would be totally... 02-26-2015, 06:54 PM
    xintersecty Being female you can... 02-26-2015, 08:33 PM
    cburns Awesome! Thank you so much. 02-27-2015, 05:07 AM
    2010AveoLT Cold solder joints were a... 02-14-2015, 03:31 AM
    cburns The clock in my 09 Aveo 5... 02-21-2015, 07:47 PM
    AndrewButler05 Faulty solder joints...? ... 02-21-2015, 10:21 PM
    ChevyCC Great Info! My aveo '09... 02-26-2015, 02:35 PM
    Daox When you do the repair, make... 02-26-2015, 03:11 PM
    ChevyCC ...still working well since... 03-25-2015, 10:51 PM
    PoisonIvy Last week, I started getting... 06-10-2015, 03:47 PM
    ChevyCC Quite glad it has been... 06-10-2015, 10:30 PM
    Twisted-X I've had to do this before on... 12-01-2015, 07:02 PM
    OG-Lou Another clock, check engine... 10-20-2020, 02:16 AM
    Previous Post Previous Post   Next Post Next Post
    1. 02-02-2015, 12:04 PM #1
      rret is offline
      What's wrong with my car?
      Join Date
      Jul 2012
      Location
      sherman ct
      Posts
      7
      Garage empty: add car
      Thanks
      0
      Thanked 2 Times in 1 Post

      How to fix your clock issues and warning lights

      my clock and warning lights (CEL, door ajar, seatbelt, etc) were not working on my 2006 aveo - this is the center mounted panel "info center" up near the windshield.
      I removed the clock and lights module and took it apart - the two internal PCB's had broken solder joints all over the place.
      the pic shows but a few. re-solder all that are bad or questionable and you should be good to go!

      (to be clear: the pic below shows just some of the bad solder joints)

      Name: clock and lights PCB's broken solder joints.jpg Views: 10963 Size: 85.1 KB
      Last edited by rret; 02-03-2015 at 10:53 PM.
      Reply With Quote Reply With Quote

    2. The Following 2 Users Say Thank You to rret For This Useful Post:

      AndrewButler05 (02-04-2015),MetroMPG (02-26-2015)
    « Backseat and Bench Removal? | Drivers/Passanger Seat Swap. Possible?? »

    Similar Threads

    1. Warning lights (check engine seat belt air bag light warnings) shorted out
      By oreos in forum Troubleshooting and Maintenance
      Replies: 1
      Last Post: 06-14-2014, 04:03 AM
    2. 04 aveo warning and indicator lights not working
      By adctled in forum Engine & Drivetrain
      Replies: 1
      Last Post: 04-26-2014, 03:19 AM
    3. A very important warning to everyone
      By Sidewinder in forum Open Forum
      Replies: 0
      Last Post: 02-07-2012, 10:33 PM
    4. 2005 not starting, dash and clock lights blinking, after oil change
      By joalesh in forum Troubleshooting and Maintenance
      Replies: 2
      Last Post: 08-23-2011, 04:08 PM
    5. WARNING ABOUT RAM AIR/COLD AIR!
      By g0ast in forum Engine & Drivetrain
      Replies: 18
      Last Post: 03-31-2008, 10:33 PM

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •  

    Forum Rules


    Garage Plus vBulletin Plugins by Drive Thru Online, Inc.