how to remove the stock stereo, ?
and, wow,, the front speakers are 4 inch!!! it SUCKS!!!!! and theres no mounting depth at all !!!
where can i find some POWERFUL 4 inch speakers that will fit there ?
back to the topic, how to remove radio ??
Printable View
how to remove the stock stereo, ?
and, wow,, the front speakers are 4 inch!!! it SUCKS!!!!! and theres no mounting depth at all !!!
where can i find some POWERFUL 4 inch speakers that will fit there ?
back to the topic, how to remove radio ??
do some more reading here, these are answered numerous times.
I have 6.5 inch speakers in the doors.. plenty of room to me...
how did you make sure your door panel is not touching your speakers?Quote:
Originally Posted by Nemasys
i have alpine type-S 6.5
make a wood spacer a way to go ?
I have 5.25 speakers with a 2 inch spacer. The door panel barely fits back on, but it does.
I have a 1 inch spacer and theres plenty of room between the speaker and the door panel and the windows go down without a problem.
http://img.photobucket.com/albums/v4...tSpeakers2.jpg
guys, how did you make sure your door panel is not touching your speakers?
Quote:
Originally Posted by Nemasys
Nice speakers !
1 inch spacer? sure ?Quote:
Originally Posted by Nemasys
are the door specification the same? of 2008 and 2009
door shell is the same yes, you need to match it up with a shallow depth speaker to roll the window down.
What you see in the picture is a 1 inch universal spacer for 6.5 inch speakers.
The only thing i had to do is drill new holes in the door to install them, 4 self tapping screws did the trick.
The speakers don't touch the door panel when its installed and the windows go down without hitting the speaker.
screw the type-s,
i went to buy a brand new 5.25 inch component, kicker comp. $170
and i seem MUCH more do-able to fit it there.
!!!!!!hey, take a closer look the the original speaker spacer, the top part of the spacer is thinner than the lower part of the spacer, , but, can i still make a 1" thick spacer? absolute 1" thick, not like the original up thinner down thicker.
i need to know, next few days is the only chance of the week i can do something,
i woek 14 hours a day
and i need to know how to remove the stock stereo,
need to work on stereo first. , or my door panels and seats are not going in!!!
went off topic,,, back to the topic, how to remove the stock stereo??? for the 08 i found info on, but 09 , still no luck
You should be able to pop out the plastic overlay around the radio with a flat screwdriver, be carefull not to force anything too much, it is plastic after all it will break. I'm not sure about the 09's but the 1st gens there are 4 screws behind the plastic covers that hold the deck in place you just pull it out.
what speaker size?
here is mine, kicker comp , componentsQuote:
Originally Posted by Nemasys
http://img.photobucket.com/albums/v1...o/DSC00209.jpg
http://img.photobucket.com/albums/v1...o/DSC00210.jpg
3/4 inch board and a 4/1 inch board makes a 1" spacer.
thanks for the advice. people.
http://img.photobucket.com/albums/v1...o/DSC00211.jpg
http://img.photobucket.com/albums/v1...o/DSC00214.jpg
Gezz man, i know its cool to fabricate your own stuff and all but all that work for 2 spacers you could have bought at Walmart for less than 7 buks... I bet it cost you that much if not more for the materials you used, plus the time to make them.
Some things just aint worth the effort to make yourself imo, nonetheless nice job.
Heres a link to the walmart spacers:
Walmart.com: Scosche 1" Universal 5.25" Or 6.5" Speaker Spacer: Auto Electronics
this is how to remove stock radio set
http://photo.qip.ru/photo/sakupelsky.../205787232.jpg
http://photo.qip.ru/photo/sakupelsky.../205787233.jpg
http://photo.qip.ru/photo/sakupelsky.../205787234.jpg
http://photo.qip.ru/photo/sakupelsky.../205787235.jpg
http://photo.qip.ru/photo/sakupelsky.../205787238.jpg
http://photo.qip.ru/photo/sakupelsky.../205787239.jpg
the board is a scrap boad from home depot, $3 each,
took less than half hour to cut them
i rather make my own than go to buy wal mart,
the wal mart spacer you probly need to drill some new hole on your doors .
i am using the factory screw holes, and the factory screws.
nice demonstration of the removal of the deck, but i already did, before your post.
Thank you for this. Was looking all over... heh this needs to be posted in How To area...Quote:
Originally Posted by Seregga
Check here, it is explained in detail:
how do i remove the factory stereo on a chevy aveo ... - JustAnswer