Inside grab handle

[NYChevoo]

Anyone know how to tighten down the inside grab handle on the drivers side door panel? For some reason my wifes grab hadle has come loose. Its not totally disconnected but I'm afraid it will break if its not fixed. It the plastic insert that sits about hip level that your fingers grab when you shut the door.

[petrified.rabbit]

Mine has screws. You might need to pull the panel and tighten the bracket as well.

[NYChevoo]

Mine has screws. You might need to pull the panel and tighten the bracket as well.

I was hoping your werent going to say that but I guess its inevitable.

[oscare003]

mine was loose 2. i screwed it down from the inside i think also i added some sticky stuff under it so it wont vibrate. i got the sticky stuff at work. its kinda like sticky tack

[NYChevoo]

mine was loose 2. i screwed it down from the inside i think also i added some sticky stuff under it so it wont vibrate. i got the sticky stuff at work. its kinda like sticky tack

Very cool! Thanks for the info. I'll give that stuff a try.

[tidus10]

my passenger side broke

[NYChevoo]

my passenger side broke

So are you going to replace it?

[tidus10]

my passenger side broke

So are you going to replace it?

i cant figure out how to, the bottom clip of the handle broke off inside the actrual door... ive been trying to pry it out with no luck

[NYChevoo]

my passenger side broke

So are you going to replace it?

i cant figure out how to, the bottom clip of the handle broke off inside the actrual door... ive been trying to pry it out with no luck

Could you locate a replacement door panel from a wrecked Aveo cheaply?

[petrified.rabbit]

reach behind it, and squeeze it with pliers, that should close the tabs to let it come through the hole.. or if the tabs are visible on the outside, use a pair of wire cutters to get underneath them and squeeze them together to pull it out.