Printable View
Anyone know how to tighten down the inside grab handle on the drivers side door panel? For some reason my wifes grab hadle has come loose. Its not totally disconnected but I'm afraid it will break if its not fixed. It the plastic insert that sits about hip level that your fingers grab when you shut the door.
Mine has screws. You might need to pull the panel and tighten the bracket as well.
I was hoping your werent going to say that but I guess its inevitable.Quote:
Originally Posted by petrified.rabbit
mine was loose 2. i screwed it down from the inside i think also i added some sticky stuff under it so it wont vibrate. i got the sticky stuff at work. its kinda like sticky tack
Very cool! Thanks for the info. I'll give that stuff a try.Quote:
Originally Posted by oscare003
my passenger side broke :-(
So are you going to replace it?Quote:
Originally Posted by tidus10
i cant figure out how to, the bottom clip of the handle broke off inside the actrual door... ive been trying to pry it out with no luckQuote:
Originally Posted by NYChevoo
Could you locate a replacement door panel from a wrecked Aveo cheaply?Quote:
Originally Posted by tidus10
reach behind it, and squeeze it with pliers, that should close the tabs to let it come through the hole.. or if the tabs are visible on the outside, use a pair of wire cutters to get underneath them and squeeze them together to pull it out.
i think my winter project will be new fiberglass doors.. so i may just be fixing this the DIY way :-P
Tidus, hope you do some pics on that. I'd love to see how it turns out!