•  
    Results 1 to 3 of 3

    Thread: Installin a amplifier to the radio

    1. #1
      Should I keep it?
      Join Date
      Apr 2010
      Location
      Cape Town, South Africa
      Posts
      37
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts

      Installin a amplifier to the radio

      Can someone please assist me, regarding where and how to install a amp to the radio? Because i got a 2009 Chev Aveo 1.6, and its not so easy to take out the radio, because they now install the radio and connect the radio to the dash on the sides so its not a simple process where u just pull out the radio. So my question is, where on the dash do you need to remove or loosen so that i can get the radio out?

      If there is a thread relating to this can u please attach a shortcut to that thread.



    2. #2
      What do you mean there's no turbo? LarsBud's Avatar
      Join Date
      Jul 2009
      Location
      Waterloo, Ontario
      Posts
      381
      Thanks
      0
      Thanked 0 Times in 0 Posts

      Re: Installin a amplifier to the radio

      It’s not all the bad. The plate around the radio is only pressure fit in place. You just need to pull the frame out with a flat head screw driver or a plastic tool, but be careful not to make it. There’s four clips two on the top (one each side) and two alone the bottom.
      Always make the best of what you have!
      http://caferacersontario.forumer.com

    3. #3
      Should I keep it?
      Join Date
      Apr 2010
      Location
      Cape Town, South Africa
      Posts
      37
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts

      Re: Installin a amplifier to the radio

      Thanx buddy, ill have a look tonight and see what happens.



    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •