New Drift Iridium Gauge installed

just finished installing my rpm gauge.
my fuel level gauge is on the way in the post and next month planning on buying the speedo mph gauge :P
they are the coolest gauges ive seen around so far, besides one or 2 tht may match up..
but they cost abit too.. give and take £100 each. paid £85ish for fuel level alone, then £130+ for tacho and speedo is around £130 aswell :(
o well u pay for wht u get i supos...


Attachment 3527

heres a google link to the vid i made of the gauge
YouTube - Kalos Aveo Drift iridium RPM gauge Project M33 EVL

That is the coolest gauge I've ever seen..... aside from the Aveo RS concept's gauges....

Quote:

---

Originally Posted by Z34guy

That is the coolest gauge I've ever seen..... aside from the Aveo RS concept's gauges....

---

thanks man :)
just waiting for the fuel level to arrive and next month ordering the speedo should look prettyyy cool with all of them lined up :D

can you get more pics of it mounted?

Quote:

---

Originally Posted by thehunterooo

can you get more pics of it mounted?

---

ye cors no probs dude, il try snap a few after work tonight :)
my fuel level gage came as well but in order to install it i need a empty then a full tank so havent installed it as my cars no on the road... and im not about to sit at a petrol station and take home a full tanks worth in cans LOL!
the fuel level one is much smaller on 53mm were as i think the rpm 1 is about 95mm if i remember correctly.. slots straight in to the stock clusters... just need a bit of foam to keep it in place.. but obv for the final touch il have it properly mounted in n secured :D

Quote:

---

Originally Posted by thehunterooo

can you get more pics of it mounted?

---

hey sorry about the quality, the lighting in my garage is really poor :(
so pics naturally came out awful but these are the few i just snapped up for you.
it hasnt been complty mounted just yet.. its just resting in the old gauges area with a bit of foam around the edges to wedge and hold it in place. :)

Attachment 3558
Attachment 3559
Attachment 3560

Wow very nice i like that guage alot. how hard was it to install?

Quote:

---

Originally Posted by reddemonx92

Wow very nice i like that guage alot. how hard was it to install?

---

not that hard to be honest mate.
hardest part i fink was parting with the money loll.
gauge cost a bomb in my eyes...
and only to find out today garages are looking to charge me around £7000 for a engine conversion as i have an auto... :(

only thing with the gauge is locating the right wire.. for some reason when you connect to the wire without the original clusters main board there it wont work.. im guessing one of the chips on that board converts or connects one of the other signals or something and then and only then when all that data gets converted to the voltage does it work...
so you will still need the original board. im going to keep it just behind or under the clusters inside the dash as im swapping my mph gauge and fuel as well.. :)
if you have any probs just mesg me. more than happy to help :)
as far as wiring its so simpl 3 wires

1 for ignition
1 for earth
1 for rpm signal

easy peasy lemon squeezy if u hav done electrics or any electrical work b4 shud b a dodl.. but as i said any probs gime a shout mate :)

how much did that gauge cost you in $

btw thanks for the pics, they didnt come out that bad :D