Putting in a switch on the dash

[jaredm]

Hi guys

im wanting to put in some driving lights and thought maybe using the factory blank circle bit of plastic opposite to the warning hazard lights.
Just wondering how I can get this 'blank' of black plastic out ?


any suggestions ?
Thanks to all the good advice on here all - it's tops !!!

Grant
from Sydney Australia

I replaced one of the blank circles with USBs. You need to take the little panels off either side of the radio then unscrew the 2 screw at the top to release the panel where the blank circles are in. Take it off and from the back of the panel you can unclip the circles. That was the easiest way I found