Printable View
Did i get your attention? sweeet thanks for looking..
how the hell do i get those plastic covers off from the back speakers so i can take those out... its a 06 4door i just dont see how to get em off ive tried brute force and they stayed on.. any help would be great
and also once i get those covers off its just 4 screws and im home free right?
i think you might have to remove the whole panel
how do i do that
first look if you have any screws
you can take them off with a phillips screwdriver
and then the rest holds in place with clips so you can just pull on the panel gently and they will pop off
just be careful not too break them
You will have to remove the door panel thats right.
- you need to remove the screw in the handle
- remove the window crank if it's not power.
- put the window all the way down.
- you need to remove the inner mirror covers.
- then start pulling the door panel from the bottom and work your way up.
- after all clips are loose you will need to lift the panel up and out the window groove.
there you go.
yea i lost them instead of breaking them :twisted:Quote:
Originally Posted by trempus
thats not the back deck speakersQuote:
You will have to remove the door panel thats right.
- you need to remove the screw in the handle
- remove the window crank if it's not power.
- put the window all the way down.
- you need to remove the inner mirror covers.
- then start pulling the door panel from the bottom and work your way up.
- after all clips are loose you will need to lift the panel up and out the window groove.
there you go.
So did it work? Did you remove the back tray easily or was it a pain in the arse?
If i'm right, i should fold down the back seats, pop out those plastic buttons, click in the gray pointy things in the trunk and then,
carefully fold the tray and remove it.
Ok ok, but here's the glitch: how do you get those grills off the tray?
they are screwed on
from underneath the tray?Quote:
Originally Posted by tidus10
Yup you have to take the tray almost completely off and there is 4 philipa head screws per screen