what do YOU have installed?

[paulsaveo]

Haha thanks Paul - The box with the sub weighs around 180 or so lbs.

It did take some time to install. I just ordered two 4 channels amps, each push over 1000RMS. I will try to document and take some pictures so you can see how the install process works. If you guys have any audio questions feel free to ask me, but remember mine is a 2005 (its very similar but slightly diff then newer models).

I will keep you posted when I put in my Q-Line 6.5" Component sets with my Crescendo Super tweeters and my discus 4.125s.

That will be nice to see. I cant wait to get everything I need to redo my install. So far I have picked up another JL 250/1 slash (black series) amp, now I am keeping my eyes out for a good deal on 2 JL 12W3s. once I have the 2 12s, I am going to do a false floor install. I cant wait. at that point I will need to upgrade the mids and highs, the 5.25 mbquart components wont be able to keep up, it will be time to go with 6.5 components up front and some better 4x6s in the rear (i like having the rear fill)

[Siege]

Ya I know what you mean. I fear I am not going to have enough midrange. I am looking at putting a couple 8" drivers under the two front seats when I replace them with racing seats. Because the racing seats should raise them high enough.

I just ordered all my LEDs and relays. Trying to get remote switches plus a panel. I am going have leds in the under-carriage, wheel wells, trunk, engine comparment, all the ventilation, floors, and the bipillar. So that should be sweet. But its going to take tooonnnnns of time.

I am trying to find a pillar pod too so I can put some voltmeters in and stuff so I can monitor my current draw. I had a 5300W surge pull already so I need to keep my eye on it lol.

[tidus10]

Ya I know what you mean. I fear I am not going to have enough midrange. I am looking at putting a couple 8" drivers under the two front seats when I replace them with racing seats. Because the racing seats should raise them high enough.

I just ordered all my LEDs and relays. Trying to get remote switches plus a panel. I am going have leds in the under-carriage, wheel wells, trunk, engine comparment, all the ventilation, floors, and the bipillar. So that should be sweet. But its going to take tooonnnnns of time.

I am trying to find a pillar pod too so I can put some voltmeters in and stuff so I can monitor my current draw. I had a 5300W surge pull already so I need to keep my eye on it lol.

what league do you run in? i know TNE considers speakers 8"+ as subwoofers...

[Siege]

You know what your probably right. I will have to check the rule book again. I currently run in MECA AS1 and DB1. I would have to see how they handle it because I would probably find a week 8" driver and set it up to a 4 channel that does my mids. I would imagine I could have them off, because I am more worried about my mono amp driving the power. Who knows.

There is a 2x competition tomorrow in Jackson, OH I am going to. So I will have to bring it up with them.

[gkottmann]

Another problem I had was with the rear speaker trays. The speaker mount didnt fit in there! So, what I did was remove the speaker mount and cut the back side of it to accommodate the speaker. I was only able to use 3 screws though, ohwell.

I just mounted the same speakers and it was a perfect fit. The key is to pull off the infinity brackets and use the Aveo's factory screws. I will post pictures later.

[aveosummit]

Currently:
DLS RA50
Second Skin Audio - Luxury Liner Pro/ Damplifier Pro
DLS X-Program SA62
Clarion DXZ785USB

still working on the substage....

From those who have heard the system..."The clarity is phenomenal and the tonal accuracy is uncanny"...

System built for sound quality.

[PERFECT_ESL]

i have 2 systems.

my aveo has:
alpine cda-9815
alpine FRV-340 (65x4 rms)
kicker comp 5.25 inch components ( 65x2)
rear stock speaker by deck power 2 of the channel of amp not used. wired to the rear pod, but not hooked.
rockford 501bd, 650watts, 2 ohm
1 12" rockford hx2 dual 4 ohm in a huge ported box.

rockford amp and alpine amp and the sub was stored for couple years.


car 2 :
alpine cda9815 i have 2 of these decks
concept 504 somthing, 50x4 rms,
JL audio coax 6.5 front,
rockford tweets, by deck power, (deck has built in adjustable crossover)
no rear speaker,
bridged 2 rear channels for 1 12" infinity in standard ported box.

[thewave]

I have a JBL deck with the bluetooth, its pretty sick
I have energy 6 1/2's in the front
6x9 in the back in sealed boxes
Sony 4 channel amp
Then 2 12 inch kicker crv 1000watt max each with a pyle amp

Just an average setup I guess but it pounds pretty good for around 1000bucks

[PERFECT_ESL]

JBL deck, i never heard any JBL deck,
sony 4 channel amp ? what? old gear? or them sony xplod products?

last night i cruise downtown and i had my sub pounding for at least an hour with full bass,
and the sub popped out,,, hahahha... (it only had 4 screws to bolt on the sub...)

[thewave]

lol woops i was too lazy to go check yesterday its a
JVC KD-R820BT

and yeah sony 4 channel xplod 600watt
the 6x9's are Almani 3 way

i woundnt say its old by any means