Results 1 to 10 of 305

Thread: Coilovers (crosspost)

LinkBack
- LinkBack URL
- About LinkBacks
Thread Tools
Search Thread
- Advanced Search
Display
- Switch to Linear Mode
- Switch to Hybrid Mode
- Threaded Mode

Threaded View

petrified.rabbit Coilovers (crosspost) 07-05-2010, 02:05 PM

xintersecty I have been watching for the... 11-02-2010, 08:51 PM

petrified.rabbit I have built one, i've sold 5... 11-02-2010, 09:29 PM

xintersecty I have to log onto the other... 11-04-2010, 08:08 PM

paulsaveo What is the cost of your end... 11-24-2010, 10:54 PM

petrified.rabbit And to answer the question... 11-02-2010, 09:40 PM

xintersecty Since the coilovers are out... 11-04-2010, 08:05 PM

petrified.rabbit the mk1 coil over will work... 11-04-2010, 08:29 PM

xintersecty I wrote to Raceland: The... 11-04-2010, 10:41 PM

petrified.rabbit well technically raceland and... 11-04-2010, 11:03 PM

petrified.rabbit The kits are $125 shipped in... 11-25-2010, 03:20 PM

petrified.rabbit Ok I am home, Setting up a... 11-30-2010, 09:00 PM

paulsaveo At $50 a set shipped, you can... 12-01-2010, 01:16 PM

khan4rtist Count me in for an order on... 12-10-2010, 04:29 PM

DanGT86 Do the Raceland/Rokkor... 03-23-2011, 02:37 AM

petrified.rabbit yes, they could get pretty... 03-23-2011, 02:52 AM

reddemonx92 The aveo has a pretty high... 03-23-2011, 01:58 PM

DanGT86 I agree. Dropping it a bit... 03-23-2011, 05:01 PM

petrified.rabbit yes, but you will also need... 03-23-2011, 07:45 PM

DanGT86 That makes sense about the... 03-23-2011, 09:49 PM

cordova2009 Lowering Kit 04-14-2011, 06:10 AM

petrified.rabbit the steps for installing it... 04-14-2011, 02:44 PM

cordova2009 ohh okay, got it. Where can I... 04-14-2011, 07:33 PM

petrified.rabbit I sell them, and... 04-14-2011, 07:53 PM

cordova2009 How much are you selling the... 04-15-2011, 03:58 AM

petrified.rabbit the endlink kit is $125... 04-15-2011, 12:48 PM

cordova2009 So I will be paying $125 for... 04-17-2011, 06:07 PM

petrified.rabbit yes, that is correct (i had... 04-17-2011, 06:22 PM

cordova2009 Okay nice! How can I purchase... 04-18-2011, 06:34 AM

Sidewinder I'm interested in coilovers... 06-01-2011, 03:00 AM

2010REDROCKET Does the first post cover ALL... 07-28-2011, 09:42 PM

petrified.rabbit you need two washers for the... 07-28-2011, 10:03 PM

emoo99 I just bought the rokkor coil... 01-05-2012, 12:34 AM

petrified.rabbit i have a thread going about... 01-05-2012, 02:30 PM

emoo99 Crap, ok put me on the list.... 01-05-2012, 02:50 PM

worshipper petrified.rabbit I was... 02-04-2012, 03:36 PM

clays wave now that looks great but at... 02-16-2012, 02:50 AM

daug1502 Just get springs and better... 02-16-2012, 03:53 AM

petrified.rabbit non adjustable height? what... 02-16-2012, 08:28 PM

clays wave ill be going down to a track... 02-16-2012, 11:03 PM

petrified.rabbit this is autoX i assume? then... 02-17-2012, 03:39 AM

daddy_braddy does the liner from inside... 02-28-2012, 04:16 PM

petrified.rabbit no, just the two bolts in the... 02-28-2012, 09:56 PM

Siege Rabbit, I have a set of the... 03-20-2012, 04:42 PM

Siege Rabbit you exceeded your... 03-24-2012, 07:48 PM

petrified.rabbit 250 message limit is just not... 03-25-2012, 04:25 AM

pltice I would like to get in on the... 03-26-2012, 08:14 PM

Siege Thanks rabbit. I bought an... 03-26-2012, 08:23 PM

petrified.rabbit the mk1 rokkors will be ok... 03-26-2012, 11:35 PM

Siege Great thanks, I also just... 03-28-2012, 09:19 PM

Siege Great thanks, I also just... 03-28-2012, 09:19 PM

khan4rtist where did you get these... 03-29-2012, 02:02 AM

AveoSwagg09 Try We manufacture the best... 03-29-2012, 02:15 AM

Siege Spacers on, Rims On 03-29-2012, 03:44 PM

Siege Recieved the endlink kit... 07-09-2012, 03:47 PM

newtwright what is the best set of cheap... 07-11-2012, 12:09 AM

Siege Rabbit - Just a heads up the... 07-11-2012, 04:55 AM

petrified.rabbit Thats strange, your supposed... 07-11-2012, 01:15 PM

Siege I originally went with an... 07-11-2012, 01:28 PM

bill i just received my raceland... 07-15-2012, 07:33 AM

xintersecty Bill which set of raceland... 07-15-2012, 11:36 AM

bill i got golf mk2 ultimo links... 07-15-2012, 03:36 PM

xintersecty At 330 spring rate for the... 07-15-2012, 09:29 PM

bill Really stiff but thats what i... 07-15-2012, 10:54 PM

petrified.rabbit I do not have any more sets,... 07-16-2012, 12:45 AM

bill Ok i will figure something... 07-16-2012, 02:08 AM

d3vo1d Wow, finally got RSKs... 08-14-2012, 06:33 PM

petrified.rabbit the lower you go in the back... 08-17-2012, 05:45 PM

d3vo1d No I did not. Did cut the... 08-17-2012, 06:11 PM

petrified.rabbit just need to buy them, the... 08-17-2012, 06:45 PM

theo111 Hey rabbit, i came across... 08-21-2012, 12:04 AM

petrified.rabbit Your about the 3rd person to... 08-21-2012, 03:28 AM

theo111 Alright sounds good,... 08-21-2012, 09:08 PM

d3vo1d Awesome! I installed the 1"... 08-23-2012, 03:41 PM

d3vo1d Ok, so now I scrapped the 1"... 08-27-2012, 12:08 PM

petrified.rabbit Haven't had internet really... 09-01-2012, 05:45 PM

d3vo1d I also went with quarter inch... 09-04-2012, 12:16 PM

d3vo1d I went with 15 x 6 wheels... 09-04-2012, 12:14 PM

frankie083 hey guys im new to this forum... 03-22-2013, 02:55 PM

festersays I have two questions, going... 04-22-2013, 06:16 AM

classic67 I ended up taking 1/2 inch... 04-22-2013, 06:26 AM

d3vo1d 6524 If you were to go... 04-22-2013, 12:37 PM

petrified.rabbit the rear is where the mk1... 04-22-2013, 09:12 PM

festersays I want to stay at the height... 04-23-2013, 05:31 AM

reddemonx92 I have a question rabbit. One... 04-23-2013, 09:46 PM

petrified.rabbit The endlink kit is... 04-23-2013, 09:50 PM

reddemonx92 I no my back coils squek a... 04-23-2013, 09:55 PM

festersays Rabbit, I'm up for a bulk... 04-24-2013, 01:06 AM

festersays I'm having trouble with... 05-06-2013, 06:04 PM

classic67 When I installed I mine I... 05-06-2013, 06:08 PM

festersays Did you have to crank the... 05-06-2013, 06:27 PM

classic67 Yes I started with them... 05-06-2013, 06:45 PM

festersays So it seems like I found the... 05-06-2013, 07:55 PM

petrified.rabbit thats a good way to do it. ... 05-06-2013, 08:39 PM

d3vo1d Are you running mk2's or 1's... 05-07-2013, 05:43 PM

petrified.rabbit i have mk2 in the front, what... 05-07-2013, 08:21 PM

classic67 Im having an issue pulling my... 05-07-2013, 08:26 PM

petrified.rabbit on mine? i notched the corner... 05-07-2013, 09:12 PM

d3vo1d I haven't ordered them yet... 05-07-2013, 09:47 PM

petrified.rabbit if your rubbing with a 6"... 05-07-2013, 11:28 PM

d3vo1d Thats the thing, it only rubs... 05-08-2013, 12:12 PM

festersays Well, I've got my rear... 05-09-2013, 03:58 AM

d3vo1d Yep, the rear has to have the... 05-09-2013, 12:51 PM

d3vo1d This is what I am talking... 05-09-2013, 01:09 PM

festersays I'm glad I wasn't the only... 05-09-2013, 01:16 PM

d3vo1d Yes I know what you mean. I... 05-09-2013, 04:25 PM

petrified.rabbit it's interesting to look at... 05-09-2013, 09:44 PM

festersays I'm running B&G's, I'm not... 05-10-2013, 02:01 AM

festersays Did anyone else have problems... 05-13-2013, 06:31 PM

petrified.rabbit what offset are you running?... 05-14-2013, 01:25 AM

festersays Spring diameter is 3 1/4... 05-14-2013, 04:34 AM

bigshane90 I'm interested in an end link... 06-17-2013, 04:23 PM

festersays I've got the bracket portion... 06-17-2013, 11:28 PM

bigshane90 I would buy it but I need the... 06-18-2013, 12:34 AM

festersays If you search... 06-18-2013, 01:28 AM

bigshane90 Alright so I just ordered... 06-18-2013, 02:27 AM

festersays I'll send you a PM in the... 06-18-2013, 07:07 AM

Pickles Slight problem here... 07-03-2013, 05:38 PM

petrified.rabbit what part is stripped the... 07-03-2013, 05:58 PM

Pickles The factory endlink stripped,... 07-03-2013, 06:07 PM

Pickles Im thinking I should just say... 07-03-2013, 06:29 PM

petrified.rabbit factory endlink is junk.. ... 07-03-2013, 06:47 PM

Pickles how would i pop the ball out... 07-03-2013, 06:55 PM

Pickles and one more problem...I cant... 07-03-2013, 07:38 PM

petrified.rabbit well, your not reusing the... 07-03-2013, 08:13 PM

Pickles I put it in a bench vise and... 07-03-2013, 10:22 PM

Pickles Ok, one last question. How... 07-04-2013, 03:47 AM

festersays I ran into similar problems... 07-04-2013, 05:23 AM

petrified.rabbit if i am reading your problem... 07-04-2013, 01:10 PM

Pickles Ok, now ive got serious... 07-04-2013, 08:21 PM

Pickles Boy...got that mess figured... 07-04-2013, 09:16 PM

classic67 I used to carry a brick with... 07-04-2013, 09:39 PM

Pickles Hahah, just finally finished.... 07-05-2013, 01:01 AM

Pickles Ok, so 14" steelies didnt... 07-05-2013, 01:24 AM

petrified.rabbit my ride height on mk2 struts... 07-05-2013, 03:06 AM

Pickles Thanks man. So glad you are... 07-05-2013, 03:26 AM

classic67 the fronts aren't the problem... 07-05-2013, 09:11 AM

petrified.rabbit the mk1 struts would be only... 07-05-2013, 12:47 PM

Pickles Odd, my problem is the fronts... 07-05-2013, 07:04 PM

classic67 Better be........pics 07-05-2013, 07:16 PM

Pickles http://imageshack.us/a/img5/17... 07-06-2013, 01:48 AM

Pickles Tehe I'll upload pics in a... 07-06-2013, 01:45 AM

petrified.rabbit looks pretty good. for the... 07-06-2013, 01:52 AM

Pickles Thanks, I measured the... 07-06-2013, 02:13 AM

Pickles OK, im still having rubbing... 07-06-2013, 02:06 PM

festersays A heat gun can help you mold... 07-06-2013, 05:06 PM

petrified.rabbit i rub all the time.. you get... 07-07-2013, 01:33 AM

robzomie10 Rabbit you still making the... 08-21-2013, 05:13 PM

Pickles Raceland Ultimos 08-21-2013, 05:37 PM

dwall47 Has anyone used these... I'm... 05-13-2014, 03:23 AM

petrified.rabbit i have not made any kits in a... 08-21-2013, 05:49 PM

bigshane90 Im having problems installing... 09-09-2013, 04:12 PM

petrified.rabbit starting with the upper... 09-10-2013, 02:07 AM

bigshane90 I put the coilover top hat... 09-12-2013, 01:01 AM

petrified.rabbit did you read the whole... 09-12-2013, 11:44 PM

USAFzac So rabbit what is the... 09-13-2013, 02:54 AM

Pickles Moar low! I've got mk1s all... 09-13-2013, 03:04 AM

USAFzac Yes me too I could sit the... 09-13-2013, 03:43 AM

bigshane90 I bought mk2s the back... 09-14-2013, 01:38 AM

petrified.rabbit Did you cut the bump stops... 09-23-2013, 08:17 PM

mralx152 Will this work on my 05 4... 09-22-2013, 10:58 PM

Pickles No offense to you but... 09-23-2013, 02:32 AM

mralx152 Im sorry but with 11 pages I... 09-23-2013, 02:51 AM

festersays If you're going coilovers,... 09-23-2013, 03:17 AM

bigshane90 No I didnt cut the bumpstops.... 10-07-2013, 06:28 AM

petrified.rabbit I did not need to buy any... 10-07-2013, 07:52 PM

reddemonx92 Hey rabbit when we install... 10-08-2013, 03:11 AM

petrified.rabbit oem helper springs? you mean... 10-08-2013, 08:07 PM

MikeC06 Do you sell the end link? ... 01-16-2014, 02:20 AM

jnhalstead quick question, do the BC... 01-17-2014, 12:43 AM

petrified.rabbit if the coils from bc are made... 01-17-2014, 01:01 AM

MikeC06 I'm going to do this.... 01-17-2014, 04:01 AM

jnhalstead I had BC on my magnum before... 01-25-2014, 01:56 PM

xintersecty I have always wondered this... 03-03-2014, 05:49 PM

swenney08 Is the end link kit... 04-08-2014, 05:31 AM

petrified.rabbit if you want to have a front... 04-08-2014, 11:09 PM

Green.Orange.Daniel Would anyone know what... 04-10-2014, 12:14 PM

molokaiboi would this coilovers work... 04-17-2014, 08:14 AM

molokaiboi ^Does anyone have the answer? 04-18-2014, 03:07 AM

petrified.rabbit i would go with the mk1... 04-18-2014, 04:58 PM

molokaiboi What do you mean by grinding? 05-12-2014, 03:21 PM

xintersecty If you had read the entire... 05-12-2014, 03:35 PM

molokaiboi So grind the side or sides,... 05-13-2014, 02:47 AM

xintersecty I was getting ready to order... 05-13-2014, 08:48 PM

Simple aveo Rabbit when you put your... 06-26-2014, 09:25 AM

Power_Queer Are the Endlink kits still... 08-06-2014, 08:21 PM

petrified.rabbit they are back in group buy... 08-06-2014, 09:02 PM

Power_Queer Do you have any type of... 08-06-2014, 10:28 PM

xintersecty I installed new coil-over... 12-29-2014, 02:35 PM

mls1993 Would this set up work with a... 04-16-2015, 05:00 PM

xintersecty Yes, I have the entire... 04-16-2015, 05:20 PM

mls1993 I dont have any dosh at the... 04-16-2015, 08:50 PM

xintersecty If you are talking to me,... 04-17-2015, 12:22 AM

RecklessZues209 I need a link kit? Or where I... 04-19-2015, 11:35 PM

Matteaveo Coilovers 01-29-2016, 02:02 AM

Matteaveo If it's easier for you u can... 01-29-2016, 02:06 AM

martinezcem I was wondering could you... 02-03-2016, 01:44 AM

petrified.rabbit I own a mac too. The host... 02-04-2016, 01:44 AM

martinezcem yeah I'm completely sol I've... 02-04-2016, 01:48 AM

martinezcem i ordered the coilover today... 02-04-2016, 01:49 AM

petrified.rabbit I work over 70 hours a week,... 02-04-2016, 02:00 AM

petrified.rabbit pulling all the way out with... 02-04-2016, 01:56 AM

martinezcem yeah I'm trying to get... 02-04-2016, 02:01 AM

martinezcem i'll definitely take note on... 02-04-2016, 02:05 AM

petrified.rabbit Sorry guys, been kind of busy... 02-04-2016, 01:49 AM

Matteaveo Please put me in that list i... 02-05-2016, 12:14 AM

Melveo This works. I've done it.... 02-04-2016, 02:14 AM

Melveo Oh yea 18x7.5 215-35-18 02-04-2016, 02:18 AM

petrified.rabbit List so far: 1. Matteaveo 02-05-2016, 01:01 AM

petrified.rabbit no one else has shown... 02-22-2016, 09:50 PM

Melveo I already cut my swaybar out... 02-05-2016, 01:30 AM

krazy_85 im glad guys are still doing... 02-22-2016, 06:45 AM

Melveo Krazy_85 I went with 215 35... 02-22-2016, 11:49 AM

Aaron_Angstadt Melveo, if you're thinking... 02-22-2016, 02:03 PM

petrified.rabbit melveo, if the would go with... 02-22-2016, 09:50 PM

d3vo1d Hey, if your gonna do MK1's I... 03-31-2016, 06:51 PM

d3vo1d If you are thinking of going... 03-31-2016, 06:55 PM

Melveo Already there I just cut my... 03-31-2016, 10:00 PM

d3vo1d I'm running 195 50 15 --... 04-01-2016, 02:59 AM

d3vo1d This is it currently. Been... 04-01-2016, 10:07 PM

d3vo1d Believe me it was a pain to... 04-02-2016, 06:04 PM

Melveo I have a slight bounce too... 04-02-2016, 08:11 PM

petrified.rabbit welcome back. 2 years in the... 04-03-2016, 02:14 AM

Melveo Love the color contrast to... 04-03-2016, 08:31 PM

Melveo Oh yea with the rear 326... 04-03-2016, 09:43 PM

Melveo 10256 this is how it sits now. 04-04-2016, 12:35 PM

Melveo Went another 5 threads this... 04-04-2016, 12:32 PM

petrified.rabbit Im not running my dust boots,... 04-04-2016, 08:22 PM

Melveo I cut my boot in half and I... 04-04-2016, 11:42 PM

Melveo Got the mounts to fit... 04-05-2016, 11:04 PM

d00wee Rabbit do you still make the... 04-08-2016, 07:17 AM

petrified.rabbit I was trying to go with a... 04-13-2016, 01:34 AM

Melveo 10261 wow I'm satisfied with... 04-08-2016, 04:18 PM

Melveo Thanks, wish the kits weren't... 04-12-2016, 04:47 PM

petrified.rabbit Car looks good. It's very... 04-13-2016, 01:38 AM

Melveo Tbh I drive hard but it still... 04-13-2016, 03:15 PM

krazy_85 Melveo, where did you get... 06-23-2016, 06:01 AM

Melveo I bought rsk coilovers and... 06-23-2016, 12:39 PM

krazy_85 Thank you for the info. I... 06-23-2016, 02:45 PM

krazy_85 10467I made the mistake of... 07-10-2016, 12:46 AM

krazy_85 10466Finally got the height... 07-10-2016, 12:40 AM

krazy_85 10468can't wait to get the... 07-10-2016, 04:09 AM

Melveo Krazy you should tutti find... 07-10-2016, 11:05 AM

krazy_85 I got alot of thread left, I... 07-10-2016, 09:12 PM

petrified.rabbit you could have bought mk1 for... 07-11-2016, 12:35 AM

krazy_85 Thanks Rabbit, I actually... 07-11-2016, 02:27 AM

Melveo Yea I shaved part of the top... 07-11-2016, 02:01 AM

krazy_85 I finally drove to work, the... 07-15-2016, 04:45 PM

petrified.rabbit I've done two flat black... 07-12-2016, 02:12 AM

xintersecty That is a fantastic job. I... 07-12-2016, 02:01 PM

krazy_85 Great job! I love that color.... 07-15-2016, 04:47 PM

petrified.rabbit I have been painting for @... 07-16-2016, 01:24 AM

northguest47 aww man do I ever love flat... 07-17-2016, 02:15 AM

xdanyx Some love from Quebec... 07-17-2016, 04:23 AM

krazy_85 Melveo, how are the 326... 10-13-2016, 07:17 AM

Melveo They work good at a decent... 10-13-2016, 03:18 PM

krazy_85 Right on. I just ordered the... 10-16-2016, 08:20 PM

Melveo My tire rub my springs... 10-16-2016, 10:54 PM

Melveo Been messing with the preload... 11-05-2016, 12:35 PM

krazy_85 10656 Finally got my 326... 11-06-2016, 07:20 PM

krazy_85 10658rear install. 11-06-2016, 07:23 PM

Melveo set rear at 10 threads from... 11-06-2016, 07:52 PM

krazy_85 Yeah, I liked the green a lil... 11-07-2016, 12:56 AM

Melveo Forgot you had different... 11-07-2016, 10:47 AM

Jarheadkilla hey got my coilovers just... 08-28-2017, 03:55 AM

Melveo You don't need end link kit... 08-28-2017, 12:38 PM

petrified.rabbit Sorry, hectic time of the... 08-29-2017, 01:05 AM

Melveo So long mk2, finally order... 11-04-2017, 01:26 PM

StefanTpounds Where can I get coilovers for... 11-11-2017, 08:34 PM

Melveo Been some months but still... 09-16-2018, 12:44 PM

project_baewoo raceland ultimo coilovers MK1... 11-19-2018, 06:51 AM

Melveo New Mk1 setup, 20k swift... 02-17-2019, 11:07 PM

Melveo Widest Aveo117081170911710 02-27-2019, 11:35 PM

rhyder7 Awesome Aveo's. The wheels on... 03-12-2019, 08:52 AM

petrified.rabbit Just stopping in, I like the... 03-02-2019, 02:00 PM

petrified.rabbit I was just cleaning out the... 04-14-2019, 02:41 AM

Melveo What rear brakes would you... 04-15-2019, 02:26 AM

petrified.rabbit Mk1-mk3 VW rear discs.... 04-18-2019, 01:55 AM

Melveo Update: S13 front coilovers... 04-24-2019, 02:04 AM

mannylongnight just getting my build started... 11-15-2022, 07:09 AM

serega12 Re: Coilovers (crosspost) 07-05-2010, 09:44 PM

petrified.rabbit Re: Coilovers (crosspost) 07-05-2010, 11:28 PM

serega12 Re: Coilovers (crosspost) 07-05-2010, 11:52 PM

serega12 Re: Coilovers (crosspost) 07-06-2010, 07:31 AM

AveoGirl Re: Coilovers (crosspost) 07-07-2010, 05:53 AM

lauzon Re: Coilovers (crosspost) 08-18-2010, 11:35 PM

serega12 Re: Coilovers (crosspost) 08-18-2010, 11:49 PM

lauzon Re: Coilovers (crosspost) 08-18-2010, 11:59 PM

petrified.rabbit Re: Coilovers (crosspost) 08-19-2010, 02:42 AM

Paulberndt I need a single kit of the... 12-31-2015, 06:06 PM

lauzon Re: Coilovers (crosspost) 08-20-2010, 01:34 AM

petrified.rabbit Re: Coilovers (crosspost) 08-20-2010, 02:16 AM

Paulberndt im desparate for A KIT!... 01-01-2016, 02:43 AM

reddemonx92 Re: Coilovers (crosspost) 08-20-2010, 02:32 AM

exodus0784 Re: Coilovers (crosspost) 09-13-2010, 03:03 PM

thehunterooo Re: Coilovers (crosspost) 09-13-2010, 04:01 PM

petrified.rabbit Re: Coilovers (crosspost) 09-13-2010, 04:45 PM

petrified.rabbit Re: Coilovers (crosspost) 09-16-2010, 04:31 PM

aleyoung Re: Coilovers (crosspost) 09-17-2010, 01:07 AM

MetroMPG Re: Coilovers (crosspost) 09-17-2010, 01:21 AM

petrified.rabbit Re: Coilovers (crosspost) 09-17-2010, 02:24 PM

screech985 Re: Coilovers (crosspost) 09-17-2010, 03:22 PM

petrified.rabbit Re: Coilovers (crosspost) 09-17-2010, 03:24 PM

screech985 Re: Coilovers (crosspost) 09-17-2010, 03:29 PM

Daox Re: Coilovers (crosspost) 09-17-2010, 04:28 PM

Previous Post

Next Post

03-20-2012, 04:42 PM #11
Siege

I'll keep it and add a turbo
Join Date

Aug 2010

Location

Ohio

Posts

173
Garage

LeLu
Lelu
Thanks

0

Thanked 0 Times in 0 Posts
Rabbit, I have a set of the MK1 rokkors, think with your kit I can get them to work on the front?
Reply With Quote

« Will Chevy Spark rims fit and work on a Chevy Aveo? | Cobalt springs? »

Posting Permissions

You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
[VIDEO] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Powered by vBulletin® Version 4.2.5
Copyright © 2025 vBulletin Solutions Inc. All rights reserved.
SEO by vBSEO
vbulletin Templates by vBskinstudio.com

Garage Plus vBulletin Plugins by Drive Thru Online, Inc.