•  
    Results 1 to 10 of 305

    Thread: Coilovers (crosspost)

    Threaded View

    petrified.rabbit Coilovers (crosspost) 07-05-2010, 02:05 PM
    xintersecty I have been watching for the... 11-02-2010, 08:51 PM
    petrified.rabbit I have built one, i've sold 5... 11-02-2010, 09:29 PM
    xintersecty I have to log onto the other... 11-04-2010, 08:08 PM
    paulsaveo What is the cost of your end... 11-24-2010, 10:54 PM
    petrified.rabbit And to answer the question... 11-02-2010, 09:40 PM
    xintersecty Since the coilovers are out... 11-04-2010, 08:05 PM
    petrified.rabbit the mk1 coil over will work... 11-04-2010, 08:29 PM
    xintersecty I wrote to Raceland: The... 11-04-2010, 10:41 PM
    petrified.rabbit well technically raceland and... 11-04-2010, 11:03 PM
    petrified.rabbit The kits are $125 shipped in... 11-25-2010, 03:20 PM
    petrified.rabbit Ok I am home, Setting up a... 11-30-2010, 09:00 PM
    paulsaveo At $50 a set shipped, you can... 12-01-2010, 01:16 PM
    khan4rtist Count me in for an order on... 12-10-2010, 04:29 PM
    DanGT86 Do the Raceland/Rokkor... 03-23-2011, 02:37 AM
    petrified.rabbit yes, they could get pretty... 03-23-2011, 02:52 AM
    reddemonx92 The aveo has a pretty high... 03-23-2011, 01:58 PM
    DanGT86 I agree. Dropping it a bit... 03-23-2011, 05:01 PM
    petrified.rabbit yes, but you will also need... 03-23-2011, 07:45 PM
    DanGT86 That makes sense about the... 03-23-2011, 09:49 PM
    cordova2009 Lowering Kit 04-14-2011, 06:10 AM
    petrified.rabbit the steps for installing it... 04-14-2011, 02:44 PM
    cordova2009 ohh okay, got it. Where can I... 04-14-2011, 07:33 PM
    petrified.rabbit I sell them, and... 04-14-2011, 07:53 PM
    cordova2009 How much are you selling the... 04-15-2011, 03:58 AM
    petrified.rabbit the endlink kit is $125... 04-15-2011, 12:48 PM
    cordova2009 So I will be paying $125 for... 04-17-2011, 06:07 PM
    petrified.rabbit yes, that is correct (i had... 04-17-2011, 06:22 PM
    cordova2009 Okay nice! How can I purchase... 04-18-2011, 06:34 AM
    Sidewinder I'm interested in coilovers... 06-01-2011, 03:00 AM
    2010REDROCKET Does the first post cover ALL... 07-28-2011, 09:42 PM
    petrified.rabbit you need two washers for the... 07-28-2011, 10:03 PM
    emoo99 I just bought the rokkor coil... 01-05-2012, 12:34 AM
    petrified.rabbit i have a thread going about... 01-05-2012, 02:30 PM
    emoo99 Crap, ok put me on the list.... 01-05-2012, 02:50 PM
    worshipper petrified.rabbit I was... 02-04-2012, 03:36 PM
    clays wave now that looks great but at... 02-16-2012, 02:50 AM
    daug1502 Just get springs and better... 02-16-2012, 03:53 AM
    petrified.rabbit non adjustable height? what... 02-16-2012, 08:28 PM
    clays wave ill be going down to a track... 02-16-2012, 11:03 PM
    petrified.rabbit this is autoX i assume? then... 02-17-2012, 03:39 AM
    daddy_braddy does the liner from inside... 02-28-2012, 04:16 PM
    petrified.rabbit no, just the two bolts in the... 02-28-2012, 09:56 PM
    Siege Rabbit, I have a set of the... 03-20-2012, 04:42 PM
    Siege Rabbit you exceeded your... 03-24-2012, 07:48 PM
    petrified.rabbit 250 message limit is just not... 03-25-2012, 04:25 AM
    pltice I would like to get in on the... 03-26-2012, 08:14 PM
    Siege Thanks rabbit. I bought an... 03-26-2012, 08:23 PM
    petrified.rabbit the mk1 rokkors will be ok... 03-26-2012, 11:35 PM
    Siege Great thanks, I also just... 03-28-2012, 09:19 PM
    Siege Great thanks, I also just... 03-28-2012, 09:19 PM
    khan4rtist where did you get these... 03-29-2012, 02:02 AM
    AveoSwagg09 Try We manufacture the best... 03-29-2012, 02:15 AM
    Siege Spacers on, Rims On 03-29-2012, 03:44 PM
    Siege Recieved the endlink kit... 07-09-2012, 03:47 PM
    newtwright what is the best set of cheap... 07-11-2012, 12:09 AM
    Siege Rabbit - Just a heads up the... 07-11-2012, 04:55 AM
    petrified.rabbit Thats strange, your supposed... 07-11-2012, 01:15 PM
    Siege I originally went with an... 07-11-2012, 01:28 PM
    bill i just received my raceland... 07-15-2012, 07:33 AM
    xintersecty Bill which set of raceland... 07-15-2012, 11:36 AM
    bill i got golf mk2 ultimo links... 07-15-2012, 03:36 PM
    xintersecty At 330 spring rate for the... 07-15-2012, 09:29 PM
    bill Really stiff but thats what i... 07-15-2012, 10:54 PM
    petrified.rabbit I do not have any more sets,... 07-16-2012, 12:45 AM
    bill Ok i will figure something... 07-16-2012, 02:08 AM
    d3vo1d Wow, finally got RSKs... 08-14-2012, 06:33 PM
    petrified.rabbit the lower you go in the back... 08-17-2012, 05:45 PM
    d3vo1d No I did not. Did cut the... 08-17-2012, 06:11 PM
    petrified.rabbit just need to buy them, the... 08-17-2012, 06:45 PM
    theo111 Hey rabbit, i came across... 08-21-2012, 12:04 AM
    petrified.rabbit Your about the 3rd person to... 08-21-2012, 03:28 AM
    theo111 Alright sounds good,... 08-21-2012, 09:08 PM
    d3vo1d Awesome! I installed the 1"... 08-23-2012, 03:41 PM
    d3vo1d Ok, so now I scrapped the 1"... 08-27-2012, 12:08 PM
    petrified.rabbit Haven't had internet really... 09-01-2012, 05:45 PM
    d3vo1d I also went with quarter inch... 09-04-2012, 12:16 PM
    d3vo1d I went with 15 x 6 wheels... 09-04-2012, 12:14 PM
    frankie083 hey guys im new to this forum... 03-22-2013, 02:55 PM
    festersays I have two questions, going... 04-22-2013, 06:16 AM
    classic67 I ended up taking 1/2 inch... 04-22-2013, 06:26 AM
    d3vo1d 6524 If you were to go... 04-22-2013, 12:37 PM
    petrified.rabbit the rear is where the mk1... 04-22-2013, 09:12 PM
    festersays I want to stay at the height... 04-23-2013, 05:31 AM
    reddemonx92 I have a question rabbit. One... 04-23-2013, 09:46 PM
    petrified.rabbit The endlink kit is... 04-23-2013, 09:50 PM
    reddemonx92 I no my back coils squek a... 04-23-2013, 09:55 PM
    festersays Rabbit, I'm up for a bulk... 04-24-2013, 01:06 AM
    festersays I'm having trouble with... 05-06-2013, 06:04 PM
    classic67 When I installed I mine I... 05-06-2013, 06:08 PM
    festersays Did you have to crank the... 05-06-2013, 06:27 PM
    classic67 Yes I started with them... 05-06-2013, 06:45 PM
    festersays So it seems like I found the... 05-06-2013, 07:55 PM
    petrified.rabbit thats a good way to do it. ... 05-06-2013, 08:39 PM
    d3vo1d Are you running mk2's or 1's... 05-07-2013, 05:43 PM
    petrified.rabbit i have mk2 in the front, what... 05-07-2013, 08:21 PM
    classic67 Im having an issue pulling my... 05-07-2013, 08:26 PM
    petrified.rabbit on mine? i notched the corner... 05-07-2013, 09:12 PM
    d3vo1d I haven't ordered them yet... 05-07-2013, 09:47 PM
    petrified.rabbit if your rubbing with a 6"... 05-07-2013, 11:28 PM
    d3vo1d Thats the thing, it only rubs... 05-08-2013, 12:12 PM
    festersays Well, I've got my rear... 05-09-2013, 03:58 AM
    d3vo1d Yep, the rear has to have the... 05-09-2013, 12:51 PM
    d3vo1d This is what I am talking... 05-09-2013, 01:09 PM
    festersays I'm glad I wasn't the only... 05-09-2013, 01:16 PM
    d3vo1d Yes I know what you mean. I... 05-09-2013, 04:25 PM
    petrified.rabbit it's interesting to look at... 05-09-2013, 09:44 PM
    festersays I'm running B&G's, I'm not... 05-10-2013, 02:01 AM
    festersays Did anyone else have problems... 05-13-2013, 06:31 PM
    petrified.rabbit what offset are you running?... 05-14-2013, 01:25 AM
    festersays Spring diameter is 3 1/4... 05-14-2013, 04:34 AM
    bigshane90 I'm interested in an end link... 06-17-2013, 04:23 PM
    festersays I've got the bracket portion... 06-17-2013, 11:28 PM
    bigshane90 I would buy it but I need the... 06-18-2013, 12:34 AM
    festersays If you search... 06-18-2013, 01:28 AM
    bigshane90 Alright so I just ordered... 06-18-2013, 02:27 AM
    festersays I'll send you a PM in the... 06-18-2013, 07:07 AM
    Pickles Slight problem here... 07-03-2013, 05:38 PM
    petrified.rabbit what part is stripped the... 07-03-2013, 05:58 PM
    Pickles The factory endlink stripped,... 07-03-2013, 06:07 PM
    Pickles Im thinking I should just say... 07-03-2013, 06:29 PM
    petrified.rabbit factory endlink is junk.. ... 07-03-2013, 06:47 PM
    Pickles how would i pop the ball out... 07-03-2013, 06:55 PM
    Pickles and one more problem...I cant... 07-03-2013, 07:38 PM
    petrified.rabbit well, your not reusing the... 07-03-2013, 08:13 PM
    Pickles I put it in a bench vise and... 07-03-2013, 10:22 PM
    Pickles Ok, one last question. How... 07-04-2013, 03:47 AM
    festersays I ran into similar problems... 07-04-2013, 05:23 AM
    petrified.rabbit if i am reading your problem... 07-04-2013, 01:10 PM
    Pickles Ok, now ive got serious... 07-04-2013, 08:21 PM
    Pickles Boy...got that mess figured... 07-04-2013, 09:16 PM
    classic67 I used to carry a brick with... 07-04-2013, 09:39 PM
    Pickles Hahah, just finally finished.... 07-05-2013, 01:01 AM
    Pickles Ok, so 14" steelies didnt... 07-05-2013, 01:24 AM
    petrified.rabbit my ride height on mk2 struts... 07-05-2013, 03:06 AM
    Pickles Thanks man. So glad you are... 07-05-2013, 03:26 AM
    classic67 the fronts aren't the problem... 07-05-2013, 09:11 AM
    petrified.rabbit the mk1 struts would be only... 07-05-2013, 12:47 PM
    Pickles Odd, my problem is the fronts... 07-05-2013, 07:04 PM
    classic67 Better be........pics 07-05-2013, 07:16 PM
    Pickles http://imageshack.us/a/img5/17... 07-06-2013, 01:48 AM
    Pickles Tehe I'll upload pics in a... 07-06-2013, 01:45 AM
    petrified.rabbit looks pretty good. for the... 07-06-2013, 01:52 AM
    Pickles Thanks, I measured the... 07-06-2013, 02:13 AM
    Pickles OK, im still having rubbing... 07-06-2013, 02:06 PM
    festersays A heat gun can help you mold... 07-06-2013, 05:06 PM
    petrified.rabbit i rub all the time.. you get... 07-07-2013, 01:33 AM
    robzomie10 Rabbit you still making the... 08-21-2013, 05:13 PM
    Pickles Raceland Ultimos 08-21-2013, 05:37 PM
    dwall47 Has anyone used these... I'm... 05-13-2014, 03:23 AM
    petrified.rabbit i have not made any kits in a... 08-21-2013, 05:49 PM
    bigshane90 Im having problems installing... 09-09-2013, 04:12 PM
    petrified.rabbit starting with the upper... 09-10-2013, 02:07 AM
    bigshane90 I put the coilover top hat... 09-12-2013, 01:01 AM
    petrified.rabbit did you read the whole... 09-12-2013, 11:44 PM
    USAFzac So rabbit what is the... 09-13-2013, 02:54 AM
    Pickles Moar low! I've got mk1s all... 09-13-2013, 03:04 AM
    USAFzac Yes me too I could sit the... 09-13-2013, 03:43 AM
    bigshane90 I bought mk2s the back... 09-14-2013, 01:38 AM
    petrified.rabbit Did you cut the bump stops... 09-23-2013, 08:17 PM
    mralx152 Will this work on my 05 4... 09-22-2013, 10:58 PM
    Pickles No offense to you but... 09-23-2013, 02:32 AM
    mralx152 Im sorry but with 11 pages I... 09-23-2013, 02:51 AM
    festersays If you're going coilovers,... 09-23-2013, 03:17 AM
    bigshane90 No I didnt cut the bumpstops.... 10-07-2013, 06:28 AM
    petrified.rabbit I did not need to buy any... 10-07-2013, 07:52 PM
    reddemonx92 Hey rabbit when we install... 10-08-2013, 03:11 AM
    petrified.rabbit oem helper springs? you mean... 10-08-2013, 08:07 PM
    MikeC06 Do you sell the end link? ... 01-16-2014, 02:20 AM
    jnhalstead quick question, do the BC... 01-17-2014, 12:43 AM
    petrified.rabbit if the coils from bc are made... 01-17-2014, 01:01 AM
    MikeC06 I'm going to do this.... 01-17-2014, 04:01 AM
    jnhalstead I had BC on my magnum before... 01-25-2014, 01:56 PM
    xintersecty I have always wondered this... 03-03-2014, 05:49 PM
    swenney08 Is the end link kit... 04-08-2014, 05:31 AM
    petrified.rabbit if you want to have a front... 04-08-2014, 11:09 PM
    Green.Orange.Daniel Would anyone know what... 04-10-2014, 12:14 PM
    molokaiboi would this coilovers work... 04-17-2014, 08:14 AM
    molokaiboi ^Does anyone have the answer? 04-18-2014, 03:07 AM
    petrified.rabbit i would go with the mk1... 04-18-2014, 04:58 PM
    molokaiboi What do you mean by grinding? 05-12-2014, 03:21 PM
    xintersecty If you had read the entire... 05-12-2014, 03:35 PM
    molokaiboi So grind the side or sides,... 05-13-2014, 02:47 AM
    xintersecty I was getting ready to order... 05-13-2014, 08:48 PM
    Simple aveo Rabbit when you put your... 06-26-2014, 09:25 AM
    Power_Queer Are the Endlink kits still... 08-06-2014, 08:21 PM
    petrified.rabbit they are back in group buy... 08-06-2014, 09:02 PM
    Power_Queer Do you have any type of... 08-06-2014, 10:28 PM
    xintersecty I installed new coil-over... 12-29-2014, 02:35 PM
    mls1993 Would this set up work with a... 04-16-2015, 05:00 PM
    xintersecty Yes, I have the entire... 04-16-2015, 05:20 PM
    mls1993 I dont have any dosh at the... 04-16-2015, 08:50 PM
    xintersecty If you are talking to me,... 04-17-2015, 12:22 AM
    RecklessZues209 I need a link kit? Or where I... 04-19-2015, 11:35 PM
    Matteaveo Coilovers 01-29-2016, 02:02 AM
    Matteaveo If it's easier for you u can... 01-29-2016, 02:06 AM
    martinezcem I was wondering could you... 02-03-2016, 01:44 AM
    petrified.rabbit I own a mac too. The host... 02-04-2016, 01:44 AM
    martinezcem yeah I'm completely sol I've... 02-04-2016, 01:48 AM
    martinezcem i ordered the coilover today... 02-04-2016, 01:49 AM
    petrified.rabbit I work over 70 hours a week,... 02-04-2016, 02:00 AM
    petrified.rabbit pulling all the way out with... 02-04-2016, 01:56 AM
    martinezcem yeah I'm trying to get... 02-04-2016, 02:01 AM
    martinezcem i'll definitely take note on... 02-04-2016, 02:05 AM
    petrified.rabbit Sorry guys, been kind of busy... 02-04-2016, 01:49 AM
    Matteaveo Please put me in that list i... 02-05-2016, 12:14 AM
    Melveo This works. I've done it.... 02-04-2016, 02:14 AM
    Melveo Oh yea 18x7.5 215-35-18 02-04-2016, 02:18 AM
    petrified.rabbit List so far: 1. Matteaveo 02-05-2016, 01:01 AM
    petrified.rabbit no one else has shown... 02-22-2016, 09:50 PM
    Melveo I already cut my swaybar out... 02-05-2016, 01:30 AM
    krazy_85 im glad guys are still doing... 02-22-2016, 06:45 AM
    Melveo Krazy_85 I went with 215 35... 02-22-2016, 11:49 AM
    Aaron_Angstadt Melveo, if you're thinking... 02-22-2016, 02:03 PM
    petrified.rabbit melveo, if the would go with... 02-22-2016, 09:50 PM
    d3vo1d Hey, if your gonna do MK1's I... 03-31-2016, 06:51 PM
    d3vo1d If you are thinking of going... 03-31-2016, 06:55 PM
    Melveo Already there I just cut my... 03-31-2016, 10:00 PM
    d3vo1d I'm running 195 50 15 --... 04-01-2016, 02:59 AM
    d3vo1d This is it currently. Been... 04-01-2016, 10:07 PM
    d3vo1d Believe me it was a pain to... 04-02-2016, 06:04 PM
    Melveo I have a slight bounce too... 04-02-2016, 08:11 PM
    petrified.rabbit welcome back. 2 years in the... 04-03-2016, 02:14 AM
    Melveo Love the color contrast to... 04-03-2016, 08:31 PM
    Melveo Oh yea with the rear 326... 04-03-2016, 09:43 PM
    Melveo 10256 this is how it sits now. 04-04-2016, 12:35 PM
    Melveo Went another 5 threads this... 04-04-2016, 12:32 PM
    petrified.rabbit Im not running my dust boots,... 04-04-2016, 08:22 PM
    Melveo I cut my boot in half and I... 04-04-2016, 11:42 PM
    Melveo Got the mounts to fit... 04-05-2016, 11:04 PM
    d00wee Rabbit do you still make the... 04-08-2016, 07:17 AM
    petrified.rabbit I was trying to go with a... 04-13-2016, 01:34 AM
    Melveo 10261 wow I'm satisfied with... 04-08-2016, 04:18 PM
    Melveo Thanks, wish the kits weren't... 04-12-2016, 04:47 PM
    petrified.rabbit Car looks good. It's very... 04-13-2016, 01:38 AM
    Melveo Tbh I drive hard but it still... 04-13-2016, 03:15 PM
    krazy_85 Melveo, where did you get... 06-23-2016, 06:01 AM
    Melveo I bought rsk coilovers and... 06-23-2016, 12:39 PM
    krazy_85 Thank you for the info. I... 06-23-2016, 02:45 PM
    krazy_85 10467I made the mistake of... 07-10-2016, 12:46 AM
    krazy_85 10466Finally got the height... 07-10-2016, 12:40 AM
    krazy_85 10468can't wait to get the... 07-10-2016, 04:09 AM
    Melveo Krazy you should tutti find... 07-10-2016, 11:05 AM
    krazy_85 I got alot of thread left, I... 07-10-2016, 09:12 PM
    petrified.rabbit you could have bought mk1 for... 07-11-2016, 12:35 AM
    krazy_85 Thanks Rabbit, I actually... 07-11-2016, 02:27 AM
    Melveo Yea I shaved part of the top... 07-11-2016, 02:01 AM
    krazy_85 I finally drove to work, the... 07-15-2016, 04:45 PM
    petrified.rabbit I've done two flat black... 07-12-2016, 02:12 AM
    xintersecty That is a fantastic job. I... 07-12-2016, 02:01 PM
    krazy_85 Great job! I love that color.... 07-15-2016, 04:47 PM
    petrified.rabbit I have been painting for @... 07-16-2016, 01:24 AM
    northguest47 aww man do I ever love flat... 07-17-2016, 02:15 AM
    xdanyx Some love from Quebec... 07-17-2016, 04:23 AM
    krazy_85 Melveo, how are the 326... 10-13-2016, 07:17 AM
    Melveo They work good at a decent... 10-13-2016, 03:18 PM
    krazy_85 Right on. I just ordered the... 10-16-2016, 08:20 PM
    Melveo My tire rub my springs... 10-16-2016, 10:54 PM
    Melveo Been messing with the preload... 11-05-2016, 12:35 PM
    krazy_85 10656 Finally got my 326... 11-06-2016, 07:20 PM
    krazy_85 10658rear install. 11-06-2016, 07:23 PM
    Melveo set rear at 10 threads from... 11-06-2016, 07:52 PM
    krazy_85 Yeah, I liked the green a lil... 11-07-2016, 12:56 AM
    Melveo Forgot you had different... 11-07-2016, 10:47 AM
    Jarheadkilla hey got my coilovers just... 08-28-2017, 03:55 AM
    Melveo You don't need end link kit... 08-28-2017, 12:38 PM
    petrified.rabbit Sorry, hectic time of the... 08-29-2017, 01:05 AM
    Melveo So long mk2, finally order... 11-04-2017, 01:26 PM
    StefanTpounds Where can I get coilovers for... 11-11-2017, 08:34 PM
    Melveo Been some months but still... 09-16-2018, 12:44 PM
    project_baewoo raceland ultimo coilovers MK1... 11-19-2018, 06:51 AM
    Melveo New Mk1 setup, 20k swift... 02-17-2019, 11:07 PM
    Melveo Widest Aveo117081170911710 02-27-2019, 11:35 PM
    rhyder7 Awesome Aveo's. The wheels on... 03-12-2019, 08:52 AM
    petrified.rabbit Just stopping in, I like the... 03-02-2019, 02:00 PM
    petrified.rabbit I was just cleaning out the... 04-14-2019, 02:41 AM
    Melveo What rear brakes would you... 04-15-2019, 02:26 AM
    petrified.rabbit Mk1-mk3 VW rear discs.... 04-18-2019, 01:55 AM
    Melveo Update: S13 front coilovers... 04-24-2019, 02:04 AM
    mannylongnight just getting my build started... 11-15-2022, 07:09 AM
    serega12 Re: Coilovers (crosspost) 07-05-2010, 09:44 PM
    petrified.rabbit Re: Coilovers (crosspost) 07-05-2010, 11:28 PM
    serega12 Re: Coilovers (crosspost) 07-05-2010, 11:52 PM
    serega12 Re: Coilovers (crosspost) 07-06-2010, 07:31 AM
    AveoGirl Re: Coilovers (crosspost) 07-07-2010, 05:53 AM
    lauzon Re: Coilovers (crosspost) 08-18-2010, 11:35 PM
    serega12 Re: Coilovers (crosspost) 08-18-2010, 11:49 PM
    lauzon Re: Coilovers (crosspost) 08-18-2010, 11:59 PM
    petrified.rabbit Re: Coilovers (crosspost) 08-19-2010, 02:42 AM
    Paulberndt I need a single kit of the... 12-31-2015, 06:06 PM
    lauzon Re: Coilovers (crosspost) 08-20-2010, 01:34 AM
    petrified.rabbit Re: Coilovers (crosspost) 08-20-2010, 02:16 AM
    Paulberndt im desparate for A KIT!... 01-01-2016, 02:43 AM
    reddemonx92 Re: Coilovers (crosspost) 08-20-2010, 02:32 AM
    exodus0784 Re: Coilovers (crosspost) 09-13-2010, 03:03 PM
    thehunterooo Re: Coilovers (crosspost) 09-13-2010, 04:01 PM
    petrified.rabbit Re: Coilovers (crosspost) 09-13-2010, 04:45 PM
    petrified.rabbit Re: Coilovers (crosspost) 09-16-2010, 04:31 PM
    aleyoung Re: Coilovers (crosspost) 09-17-2010, 01:07 AM
    MetroMPG Re: Coilovers (crosspost) 09-17-2010, 01:21 AM
    petrified.rabbit Re: Coilovers (crosspost) 09-17-2010, 02:24 PM
    screech985 Re: Coilovers (crosspost) 09-17-2010, 03:22 PM
    petrified.rabbit Re: Coilovers (crosspost) 09-17-2010, 03:24 PM
    screech985 Re: Coilovers (crosspost) 09-17-2010, 03:29 PM
    Daox Re: Coilovers (crosspost) 09-17-2010, 04:28 PM
    Previous Post Previous Post   Next Post Next Post
    1. 09-16-2018, 12:44 PM #11
      Melveo is offline
      The Lowest Static Aveo Melveo's Avatar
      Join Date
      Jan 2016
      Location
      Raleigh NC
      Posts
      256
      Thanks
      0
      Thanked 25 Times in 22 Posts
      Been some months but still kickin it.
      More cutting, more clearance, more low. Name: 20180911_165705.jpg Views: 1574 Size: 299.9 KB
      Reply With Quote Reply With Quote

    2. The Following User Says Thank You to Melveo For This Useful Post:

      project_baewoo (11-29-2018)
    « Will Chevy Spark rims fit and work on a Chevy Aveo? | Cobalt springs? »

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •  

    Forum Rules


    Garage Plus vBulletin Plugins by Drive Thru Online, Inc.