How low should I go?

[2010REDROCKET]

OKAY, Here goes...

1. How did you get so low,plus how much did it cost to get that level of scrape.

2. Where did you get those wheels and how much?

AND 3. Is there anyone out there willing to help me find or provide some sponsorship for my states gumball rally? Im in desperate need for my aveo =[

[xintersecty]

Rabbit post a picture of your car in the foreground and "normal" aveos in the background.

Every time I drive and I see an other Aveo, I always say "My, what a small car" then I realize it's an aveo then I say "I drive that...!" LOL When I drive my car I never feel small in it and it does not drive small. I stand 6 feet about 200 pounds and I always feel comfortable in my car. Just don't sit the back seat

[petrified.rabbit]

Foreground (best i can do):

[xintersecty]

Sweet pictures...Rabbit. THANKS!

[petrified.rabbit]

OKAY, Here goes...

1. How did you get so low,plus how much did it cost to get that level of scrape.

2. Where did you get those wheels and how much?

AND 3. Is there anyone out there willing to help me find or provide some sponsorship for my states gumball rally? Im in desperate need for my aveo =[

@ $500 for the complete suspension.

wheels are from discounttiredirect.com, "works replicas" drag dr20, staggered fitment.

if i had extra money to sponsor you i would have the brake kits/short shifters/ etc finished already, i'm saving for the investments on production. sorry.

[2010REDROCKET]

lol, I was kind of hoping to get the site as a whole to help if possible. But so far I haven't even gotten a sticker =[ haha

[daug1502]

I still gotta get the envelope sent out for mine lol.

anyway Rabbit, your car looks great, but that's too low for me. I think the H&R's will probably be low enough, I can always go lower in the future. But I would like other peoples opinions too. and I will do the math on the 30mm drop later lol, I am accustomed to inches.

[AveoSwagg09]

Ok I'm on my phone but here this goes.

Aveoswagg: its not 1/4 inch drop it is 1.4(one and 4 tenths) inches I don't know if that's what you meant, but there is more than an inch difference. Any drop will be an improvement over stock.

I meant the difference between the Eibachs and the H&Rs is about 1/4". I personally run Eibachs and RPF01s (16x7 ET35 215/40/16) and im going to drop around the height that Rabbit is at when i get my BC coil overs in. With that kinda wheel gap even with H&Rs you shouldn't have a problem unless you hit every 2ft. pothole in town. lol

[daug1502]

I understand now Swagg. And that photo was a good help too thanks.

[PERFECT_ESL]

600 lbs load