that the radius of the control arm bushings, not the struts pushing out so to speak, but the pivot point of the control arm.
that the radius of the control arm bushings, not the struts pushing out so to speak, but the pivot point of the control arm.
Thanks for the information rabbit, do you know about the 2 pt front lower brace from summit that xiogary had on his aveo?
xiogary has a different summit than we do. it is a 2 pt brace from an optra if i remember right. But i think if would be prudent to bau a cheaper brace that is knowingly too wide, shorten it too fit and the cut the tab off and weld it where it needs to be.
personally i would try starting with one like this:
http://www.ebay.com/itm/92-00-Civic-...sories&vxp=mtr
Where did you find the smaller sway bar link and bracket
I made "kits" for people. I might still have a few brackets here of the thicker design (not as clean cut due to thickness). The rest is available through the sources listed below.
Look here for what you need.
https://www.aveoforum.com/forum/f85/...ts-list-22150/