Now to install the strut.

push the strut back up into the strut tower. Place the new upper plate thing(sorry don't know the name) over the stem and loosely snug up the nut that holds it on:



Align the lower bolts that hold the strut to the spindle and slide the bolts on and loosely snug the nuts just to hold it all in place.

Tighten down the upper nut while holding the piston rod stem. Same photo as this:



Tighten the bolts that hold the strut to the spindle. Same photo as this:



Slide the brake line back in place.

Reattach the sway bar end link and tighten. Same photo as this:



That's pretty much it, you end up with this:



And the top should look like this:



Double and triple check everything. You might also need an alignment after wards, we did.