OK I looked at these pics posted (posted from the link on page 4)

We are support to TAP in wire/pin #6 and #7 as per below diagram right?
http://i51.photobucket.com/albums/f4...rm/pinout1.jpg


NOW... If you look at this closely, he's tapped in pin #1 and #12 and not #6 & #7 as the diag above states..
http://i51.photobucket.com/albums/f4...m/100_0623.jpg



So I'm all mixed up. First off, my harness colours don't match in my ride. If I refer to the pictures, it should be the top one and it should be white. My top harness is grey and the bottom one is white. On both harnesses, I have wires running on both pins #6 and #7, actually, they are pretty much full of wires!

So, is it the top harness I should use no matter what? Should I be connecting to pins 1 and 12? Man o man... If you look closely at the diagram, the clip is facing upwards, on the picture, he is holding the clip downwards. Not sure if anyone is catching my drift?