Front motor mount?

[petrified.rabbit]

Are your different than mine? Looks close to being able to press into the passenger side mount. Maybe within 10mm of fitting without pulling the mount.

[serega12]

How about the other two mounts?

[serega12]

So I found this on eBay... I asked him if it's for the manual or automatic, and he said they will fit both transmissions. I'm sure they will bolt in there, but from what I've seen on rockauto.com and gmpartsdirect.com and other places, they are different part number... Any thoughts? http://cgi.ebay.com/ebaymotors/04-08-Ch ... 141wt_1165

[serega12]

Also, which would you use and why, 80A shore hardness or 94A shore hardness and why?

[serega12]

Also, which would you use and why, 80A shore hardness or 94A shore hardness and why?

umm... anyone?

I'd like to order the stuff sometime this week, but would like to hear back from you guys first about which hardness polyurethane is better and why... and whether there's a difference in motor mounts between auto and manual in our case.

[petrified.rabbit]

for he hardness, the harder mounts will vibrate more.

i think the parts of the mounts you are getting is the same, but the brackets that bolt to those are different. but cant say i rely on pictures on the internet posting like actual pictures for verification

[oscare003]

http://www.uniquemotorsports.com/2010/0 ... ng-take-2/
found this

[subachad]

good link, that shows the pitch mount and the passenger mount. The ebay link earlier is what my mounts look like. I have a 5sp. I don't know about the AT, I suspect the transmission mount is slightly different, but I don't know how.

Here is the picasa photo gallery link to the driver side. http://picasaweb.google.com/subachad/20 ... ntFilling#

I used the non caulking gun based window weld for this and it just got messy. As I said before the next set of mounts I do, I'll use window weld again, it's a very well spent $15 and a few hours of work.

[serega12]

Mine looks like that too, and the guys I bought it from said it works for both (that link above, got it for best offer of $139+shipping, so 10 bucks off)... we'll see when it arrives. I also ordered some Devcon Flexane 94 Liquid (1 LB) from Amazon... it ran me like $56 with shipping. Will be doing those as soon as all of it arrives. Looking forward to that.

[FASTRAKR]

Did you do this? Curious how it worked out.