Need Help With DIY Cruise Control on 2008

[Mantisman]

I have been reading pretty much every post on here regarding this mod but my harness has different colored wires than that discussed here and I just want to confirm which ones I should be using. This is the connector located right below the steering column behind the panel as described by Thud Slamrod in the cruise control DIY thread, post #198. Of course my car is different and has a different color scheme for my wiring, probably due to it being the Canadian version but I just want to confirm which wires I should be tapping into here. My car is a 2008 Pontiac Wave hatchback so essentially the Canadian version of the aveo5. Can anyone tell me which colored wires I need to tap into to add the cruise control switch? Thanks in advance.

[Mantisman]

Got it installed finally and just for anyone else that may be trying this mod still, it was the two green wires in my case. I made a diagram on this photo and it was pins 7 & 4 in my diagram. Works like a charm and was super simple to do.