Need Help With DIY Cruise Control on 2008

I have been reading pretty much every post on here regarding this mod but my harness has different colored wires than that discussed here and I just want to confirm which ones I should be using. This is the connector located right below the steering column behind the panel as described by Thud Slamrod in the cruise control DIY thread, post #198. Of course my car is different and has a different color scheme for my wiring, probably due to it being the Canadian version but I just want to confirm which wires I should be tapping into here. My car is a 2008 Pontiac Wave hatchback so essentially the Canadian version of the aveo5. Can anyone tell me which colored wires I need to tap into to add the cruise control switch? Thanks in advance.

Attachment 11886Attachment 11887

Got it installed finally and just for anyone else that may be trying this mod still, it was the two green wires in my case. I made a diagram on this photo and it was pins 7 & 4 in my diagram. Works like a charm and was super simple to do.Attachment 11915